just thought i'd share.
dmesg:
OpenBSD 2.9-stable (VAIO_N505VE) #1: Wed Jun 27 13:08:10 EST 2001
root@mobile:/usr/src/sys/arch/i386/compile/VAIO_N505VE
cpu0: Intel Celeron (Mendocino) ("GenuineIntel" 686-class, 128KB L2 cache) 332 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 133738496 (130604K)
avail mem = 120786944 (117956K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6c) BIOS, date 08/23/99, BIOS32 rev. 0 @ 0xfd8a0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev. 2.1 @ 0xfd8a0/0x760
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf60/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
WARNING: can't reserve area for I/O APIC.
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Management" rev 0x03 at pci0 dev 7 function 3 not configured
"Sony CXD3222 FireWire" rev 0x02 at pci0 dev 8 function 0 not configured
yds0 at pci0 dev 9 function 0 "Yamaha 744" rev 0x02: irq 9
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AZTECH 3D
audio0 at yds0
vga0 at pci0 dev 10 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Rockwell RS56/SP-PCI11P1 Modem" rev 0x01 at pci0 dev 11 function 0 not configured
cbb0 at pci0 dev 12 function 0 "Ricoh 5C475 PCI-CardBus" rev 0x80: irq 9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
opl0 at yds0: model OPL3
midi1 at opl0:
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask 4200 netmask 4200 ttymask 5282
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
configuration files:
issues with OpenBSD 2.9:
mail me at dros@monkey.org to add to the page, etc...