[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Broadcom BCM5704C



	on my HP 1U server, there's Broadcom BCM5704C dual GbE adapter.
	somehow openbsd boot floppy (i used snapshot) does not attach it to
	bge0/1.  any clues?

itojun

--- openbsd (hand-typed)
pchb4 at pci0 dev 16 function 2 "ServerWorsks CIOB-E" rev 0x12
pci2 at pchb4 bus 2
"Broadcom BCM5704C" rev 0x02 at pci2 dev0 function 0 not configured
"Broadcom BCM5704C" rev 0x02 at pci2 dev0 function 1 not configured

--- netbsd
NetBSD 2.99.14 (GENERIC) #0: Tue Jan 18 19:02:42 CET 2005
	bouyer_(_at_)_pop_(_dot_)_lip6_(_dot_)_fr:/local/pop1/bouyer/tmp/i386/obj/local/pop1/bouyer/current-clean/src/sys/arch/i386/compile/GENERIC
total memory = 2047 MB
avail memory = 1996 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Xeon (686-class), 3199.31 MHz, id 0xf25
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID>
cpu0: "Intel(R) Xeon(TM) CPU 3.20GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CMIC-SL PCI/AGP bridge (rev. 0x32)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CMIC-SL PCI/AGP bridge (rev. 0x00)
vga1 at pci0 dev 3 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks CSB6 southbridge (rev. 0xa0)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB6 RAID/IDE Controller (rev. 0xa0)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks CSB6 USB Host Controller (rev. 0x05)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb2 at pci0 dev 15 function 3
pchb2: ServerWorks CSB6 ISA/LPC bridge (rev. 0x00)
pchb3 at pci0 dev 16 function 0
pchb3: ServerWorks CIOB-E PCI-X bridge (rev. 0x12)
pci1 at pchb3 bus 1
pci1: i/o space, memory space enabled
pchb4 at pci0 dev 16 function 2
pchb4: ServerWorks CIOB-E PCI-X bridge (rev. 0x12)
pci2 at pchb4 bus 2
pci2: i/o space, memory space enabled
bge0 at pci2 dev 0 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge0: interrupting at irq 5
bge0: ASIC BCM5704 A2 (0x2002), Ethernet address 00:12:79:95:52:4a
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci2 dev 0 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge1: interrupting at irq 11
bge1: ASIC BCM5704 A2 (0x2002), Ethernet address 00:12:79:95:52:4b
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <Maxtor 6Y080L0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(rccide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
umass0 at uhub0 port 3 configuration 1 interface 0
umass0: Y-E DATA USB Floppy Drive, rev 1.10/4.01, addr 2
umass0: using UFI over CBI with CCI
atapibus0 at umass0: 2 targets
sd0 at atapibus0 drive 0: <Y-E DATA, USB-FDU, 4.01> disk removable
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock time much less than file system time
WARNING: using file system time
WARNING: CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)



Visit your host, monkey.org