sis 900

[Georgi Makedonski <0x00_(_at_)_rambler_(_dot_)_ru>]

Hello,

I'm runnin OpenBSD 3.3 Box but have a lot of problem
first is network my big problem Sis 900 ... on slackware
and windows working fine but on OpenBSD have problem
see that :

#ifocnfig -m sis0
sis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        address: 00:40:ca:c2:31:d9
        media: Ethernet none (none)
        supported media:
                media none

#cat /etc/hostname.sis0
inet 172.16.88.200 255.255.0.0 NONE media autoselect

#cat /usr/src/sys/arch/i386/conf/MG | grep ukphy
ukphy*  at mii? phy ?                           # "unknown" PHYs

#cat /usr/src/sys/arch/i386/conf/MG | grep sis
sis*    at pci? dev ? function ?                # SiS 900/7016 ethernet


#dmesg
OpenBSD 3.3 (MG) #0: Sun Jun  8 08:14:43 CEST 2003
    root_(_at_)_zxmkl62_(_dot_)_extern_(_dot_)_uni-tuebingen_(_dot_)_de:/usr/src/sys/arch/i386/compile/MG
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD,3DNOW
real mem  = 534294528 (521772K)
avail mem = 492232704 (480696K)
using 4278 buffers containing 26816512 bytes (26188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1b) BIOS, date 04/04/02, BIOS32 rev. 0 @ 0xfd890
pcibios0 at bios0: rev. 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 PCI System I/O Chipset" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x6000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 648 Host-PCI" rev 0x03
ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x324 rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 PCI System I/O Chipset" rev 0x14
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 16383 cyl, 16 head, 63 sec, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324B, U102> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97 Audio" rev 0xa0: irq 5, SiS7012 AC97
ac97: codec id 0x414c4720 (Avance Logic <20>)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 5, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 5, OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci0 dev 3 function 2 "SIS 5597/5598 USB" rev 0x0f: irq 5, OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"SIS 7002 USB" rev 0x00 at pci0 dev 3 function 3 not configured
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5 address 00:40:ca:c2:31:d9
wi0 at pci0 dev 6 function 0 "Intersil PRISM2.5 Mini-PCI WLAN" rev 0x01: irq 10
wi0: PRISM2.5 ISL3874A(Mini-PCI), Firmware 1.1.1 (primary), 1.6.3 (station), address 00:07:ca:01:15:43
cbb0 at pci0 dev 12 function 0 "O2 Micro Inc OZ6912 and OZ6972 CardBus" rev 0x00: irq 10
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask c420 netmask c420 ttymask d422
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub1 port 2 configuration 1 interface 0
umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2
umass0: using SCSI over BBB-P
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <NEODIO, USB Storage-SMC, 302D> SCSI0 0/direct removable
sd0: mode sense (4) returned nonsense; using fictitious geometry
sd0(umass0:1:0): Check Condition on opcode 0x25
    SENSE KEY: Not Ready
     ASC/ASCQ: Medium Not Present
sd0(umass0:1:0): could not get size
sd0: 0MB, 0 cyl, 64 head, 32 sec, 512 bytes/sec, 0 sec total



  

-- 
Best regards,
 Georgi                          mailto:0x00_(_at_)_rambler_(_dot_)_ru