[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cdrecord and hp 9200



i have a scsi based ho cdrw modle 9200(i), on an adaptec 2940U, i cannot get 
cdrcord 1.10 or 1.11 to see or use it.

# cdrecord -scanbus
Cdrecord 1.10 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are 
root.
#

------------------------------
dmesg output

ahc1 at pci0 dev 11 function 0 "Adaptec AHA-2940U" rev 0x01: irq 10
ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets
ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
ahc1: target 0 using tagged queuing
sd0 at scsibus0 targ 0 lun 0: <QUANTUM, ATLAS IV 18 WLS, 0808> SCSI3 0/direct 
fixed
sd0: 17522MB, 13816 cyl, 8 head, 324 sec, 512 bytes/sec, 35885168 sec total
ahc1: target 1 synchronous at 20.0MHz, offset = 0x8
ahc1: target 1 using tagged queuing
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, ATLAS IV 18 WLS, 0808> SCSI3 0/direct 
fixed
sd1: 17522MB, 13816 cyl, 8 head, 324 sec, 512 bytes/sec, 35885168 sec total
(ahc1:A:2:0): refuses WIDE negotiation.  Using 8bit transfers
ahc1: target 2 synchronous at 10.0MHz, offset = 0xf
cd0 at scsibus0 targ 2 lun 0: <HP, CD-Writer+ 9200, 1.0c> SCSI4 5/cdrom 
removable
(ahc1:A:6:0): refuses WIDE negotiation.  Using 8bit transfers
ahc1: target 6 synchronous at 20.0MHz, offset = 0xf
cd1 at scsibus0 targ 6 lun 0: <TOSHIBA, CD-ROM XM-6401TA, 1009> SCSI2 5/cdrom 
removable
isa0 at pcib0


scsi -f /dev/cd0a -p -b 0
scsi: unable to open device /dev/cd0a: Device not configured
#

this is on a OpenBSD -currrent system

# uname -a
OpenBSD hiemdall.xscanners.org 3.2 GENERIC#41 i386
# dmesg
OpenBSD 3.2-beta (GENERIC) #41: Wed Sep 18 15:47:10 MDT 2002
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC



what am i missing, or this not a supported configuration, 



Visit your host, monkey.org