[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: XFree86 4.0.3/wscons(2.8 current) problems



Let me also clarify a little by saying that it pukes when
"InputDevice"'s Protocol subsection is value'd as "wsmouse", and the
Device is pointed to the proper wsmouse entry in /dev. X says that the
Protocol type is invalid, again I apologize if this is an offtopic
XFree86 problem. Peace,
	-ghuff

Gary Huff wrote:
> 
> Ok,
>         I've searched mailing lists, and pounded google.com to death before
> posting. Found a lot to do with NetBSD and wscons, but nothing of
> relevance to fix this issue. I've upgraded from 2.8, to 2.8 current and
> rebuilt my xf86 4.0.2 source tree with the 4.0.3 patch, and custom
> driver for my video card. Problem is, when I go to set my mouse protocol
> in the XF86Config to "wsmouse", it does not work. I built the X tree
> under current, and as far as I've read wscons support should have been
> built in given that the X tree was built under 2.8 current. I've also
> tried pointing my InputDevice to Protocol "PS/2" and Device
> "/dev/psm0||/dev/pms0" in order to try and get it to just work again,
> but no avail. All the examples i've seen have had "mouse" as the driver
> for InputDevice. startx returns:
> 
> (EE) xf86OpenSerial: Cannot open device /dev/psm0
>         Operation not supported by device.
> (EE) Mouse1: cannot open input device
> (EE) PreInit failed for input device "Mouse1"
> (II) UnloadModule: "mouse"
> 
> I created the ws* devices using the updated MAKEDEV script with current,
> and am kind of stumped. Has anyone else dealt with this? Is there at
> least a way to restore PCVT functionality and what not to use the PS/2
> /dev/psm* device with X? Am I overlooking something blatantly obvious?
> If so, feel free to point out my stupidity. I apologize in advance if
> this is considered "off-topic", so don't waste your time by sending me
> e-mail voicing your lame ass opinion that it is such. Peace,
>         -Gary Huff
> 
> P.S. Here's a dmesg for good times. It couldn't hurt, I suppose.
> 
> dmesg:
> 
>         OpenBSD 2.8-current (GENERIC) #0: Thu Apr 12 12:17:24 EST 2001
>     root_(_at_)_tempest:/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 597 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
> real mem  = 334999552 (327148K)
> avail mem = 305401856 (298244K)
> using 4114 buffers containing 16850944 bytes (16456K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 07/18/00, BIOS32 rev. 0 @
> 0xfc177
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 100%
> apm0: AC on, battery charge high, estimated 2:27 hours
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0190/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:05:0 ("Intel 82371FB PCI-ISA" rev
> 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> a1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1214GAP>
> wd0: 16-sector PIO, LBA, 11513MB, 16383 cyl, 16 head, 63 sec, 23579136
> sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Management" rev 0x03 at pci0 dev 5 function 3 not
> configured
> vendor "Toshiba", unknown product 0xd01 (unknown class 0x0d, subclass
> 0x00, rev 0x00) at pci0 dev 9 function 0 not configured
> cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC95B PCI-CardBus" rev 0x07:
> irq 11
> cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC95B PCI-CardBus" rev 0x07:
> irq 11
> maestro0 at pci0 dev 12 function 0 "ESS Maestro 2E" rev 0x10: irq 11
> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
> ac97: codec features 18 bit DAC, 18 bit ADC, Rockwell 3D
> audio0 at maestro0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> fd1 at fdc0 drive 1: density unknown
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> biomask 4840 netmask 4840 ttymask 5842
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> dc0 at cardbus0 dev 0 function 0 irq 11 address 00:10:a4:f3:77:b4
> tqphy0 at dc0 phy 0: 78Q2120 10/100 media interface, rev. 10
> Xircom, CardBus Ethernet 10/100 + Modem 56, CBEM56G, 1.03 (manufacturer
> 0x105, product 0x1000) vendor "Xircom", unknown product 0x103 (class
> communications, subclass serial, rev 0x03) at cardbus0 dev 0 function 1
> not configured