OpenBSD-current/pmax won't boot

[Sean Cavanaugh <seanc_(_at_)_unixgeeks_(_dot_)_ca>]

Hello

I just tried to build a new kernel on pmax using current sources, but
when I try to reboot the system, the new kernel fails to load. This was
built under 2.8, which is the latest version available.

What happens is:
--

>> boot 3/rz1/bsd -a
Size: 1424080+0+96772
Starting at 0x80030000


KN02-CA V2.0m     (PC:0x80000004, SP: 0x8002ffa0)
>>
--

There is no other output, and I don't have enough info to know where to
start looking.  If anyone knows what the problem might be and how to fix
it, I won't mind helping out to make it boot.

I did have to do a 'make include' before the compile would build, since
otherwise it would fail in networking code (I believe something to do
with IPv6, but I forgot write it down).

Lastly, the machine is a DECStation 5000/25 (MAXine)

dmesg: 

Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights
reserved.
Copyright (c) 1995-2000 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

vm_mem_init: WARN: MD code did not set page size
OpenBSD 2.8-stable (GAIUS) #0: Sun Apr  1 20:06:48 GMT 2001
    root_(_at_)_gaius:/usr/src/sys/arch/pmax/compile/GAIUS
real mem = 41943040
avail mem = 36896768
using 537 buffers containing 2199552 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000 CPU Rev. 3.0 with MIPS R3010 FPC Rev. 4.0
tc0 at mainbus0: 12.5 MHz clock
asic0 at tc0 slot 3 offset 0x0
le0 at asic0 offset 0xc0000 priority 4: address 08:00:2b:2b:ea:f6
le0: 32 receive buffers, 8 transmit buffers
scc0 at asic0 offset 0x100000 priority 5
clock0 at asic0 offset 0x200000 priority 0
isdn at asic0 offset 0x240000 priority 7 not configured
dtop0 at asic0 offset 0x280000 priority 6
fdc at asic0 offset 0x2c0000 priority 2 not configured
asc0 at asic0 offset 0x300000 priority 3: target 7
xcfb0 at tc0 slot 2 offset 0x0fb: more frame buffers probed than
configured!

sfb0 at tc0 slot 0 offset 0x0 (1280x1024x8) (console)
Beginning old-style SCSI device autoconfiguration
rz1 at asc0 drive 1 lun 0 DEC RZ23L    (C) DEC rev 2528
rz1: 116MB, 1523 cyl, 4 head, 39 sec, 512 bytes/sec, 237588 sec total
rz2 at asc0 drive 2 lun 0 DEC RZ23L    (C) DEC rev 2528
rz2: 116MB, 1523 cyl, 4 head, 39 sec, 512 bytes/sec, 237588 sec total
rootdev=0x1510 rrootdev=0x3810 rawdev=0x3812
 

-- 
Sean Cavanaugh - seanc_(_at_)_unixgeeks_(_dot_)_ca