[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

CD playing problem



I just installed xmcd and I have a problem. It plays a track and stops playback
at the end of the track. Workman does this as well. However cdio seems to play
the cd though. But, if I try to use the status command, playback stops and the
current track information is not always correct. Any thoughts? I've included a
dmesg at the end of this message.
------------------
Trevor R.H. Clarke                     Computer Science House
Rochester Institute of Technology      Systems Programmer for ISC
retrev_(_at_)_csh_(_dot_)_rit_(_dot_)_edu                     trcsys_(_at_)_rit_(_dot_)_edu
http://www.csh.rit.edu/~retrev/        finger retrev_(_at_)_csh_(_dot_)_rit_(_dot_)_edu for PGP key

-----
OpenBSD 2.8 (GENERIC) #399: Mon Nov  6 10:59:23 MST 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 497 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R,SIMD
real mem  = 268025856 (261744K)
avail mem = 243511296 (237804K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/04/99, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfc670, size 176 bytes (9
ent
ries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA,
chan
nel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91024D4>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 9765MB, 16383 cyl, 16 head, 63 sec, 19999728 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-140B, d005> SCSI0 5/cdrom
remo
vable
sd0 at scsibus0 targ 1 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct removable
sd0: drive offline
cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
sd0: can use 32-bit, PIO mode 0
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not
c
onfigured
ppb1 at pci0 dev 15 function 0 "DEC DECchip 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11 address

00:c0:4f:25:5c:99
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq
5
 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
"CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
"CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
biomask c040 netmask c840 ttymask d8c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cd0(atapiscsi0:0:0): Check Condition on opcode 47
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
cd0(atapiscsi0:0:0): Check Condition on opcode 47
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
cd0(pciide0:1:0): timeout
        type: atapi
        c_bcount: 24
        c_skip: 0
pciide0:1:0: device timeout, c_bcount=24, c_skip=0
cd0: transfer error, downgrading to Ultra-DMA mode 1
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3