PPP multilink

[Rafael Sanches <ixonz_(_at_)_uol_(_dot_)_com_(_dot_)_br>]

I need some help with PPP multilink
I was trying to set up a multilink ppp but I can't get it working, i don't know why.. and i don't
find any help in the internet
my config files are:

ml:
set timeout 0
set log phase chat
set device /dev/cua01 /dev/cua02
set phone "123456"
set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 \"\" ATZ \
OK-AT-OK \\dATDT\\T TIMEOUT 45 CONNECT"
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
set authname mylogin
set authkey mypass

set mrru 1500
clone 1,2
link deflink remove

link 1,2 set mode ddial

link 1 set device /dev/cua01
link 2 set device /dev/cua02

------------------------------------

this is my netstat -r after conect the second modem:

Internet:
Destination        Gateway            Flags     Refs     Use    Mtu  Interface
default            200.193.107.254    UGS         0    40008   1500  tun0
loopback           localhost          UGRS        0        0  32972  lo0
localhost          localhost          UH          2        0  32972  lo0
192.168.1/24       link#1             UC          0        0   1500  ne1
192.168.1.100      0:c0:df:e8:d5:5e   UHL         4    48825   1500  ne1
mufumbo            localhost          UGHS        0        0  32972  lo0
200.193.107.254    200.193.107.20     UH          1        0   1500  tun0
200.203.145.254    200.203.145.96     UH          0        0   1500  tun1
BASE-ADDRESS.MCAST localhost          URS         0        0  32972  lo0

-----------------------------------

and this is my log file when the second modem is conecting:

Dec  4 18:34:36 mufumbo /bsd: tun1: not multicast capable, IPv6 not enabled
Dec  4 18:34:36 mufumbo /bsd: tun1: not multicast capable, IPv6 not enabled
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: Using interface: tun1 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: deflink: Created in closed state 
Dec  4 18:34:36 mufumbo ppp[24769]: tun1: Command: default: set device /dev/cua01 
Dec  4 18:34:36 mufumbo ppp[24769]: tun1: Command: default: set speed 115200 
Dec  4 18:34:36 mufumbo ppp[24769]: tun1: Command: default: set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT 
Dec  4 18:34:36 mufumbo ppp[24769]: tun1: Command: mp: set timeout 0 
Dec  4 18:34:36 mufumbo ppp[24769]: tun1: Command: mp: set log phase chat 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: 1: Cloned in closed state 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: 2: Cloned in closed state 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: bundle: Establish 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: 1: closed -> opening 
Dec  4 18:34:36 mufumbo ppp[24769]: Phase: 2: closed -> opening 
Dec  4 18:34:36 mufumbo ppp[23209]: Phase: PPP Started (auto mode). 
Dec  4 18:34:36 mufumbo ppp[23209]: Phase: 1: /dev/cua01 is in use 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Failed to open device 
Dec  4 18:34:36 mufumbo ppp[23209]: Phase: 1: Enter pause (30) for redialing. 
Dec  4 18:34:36 mufumbo ppp[23209]: Phase: 2: Connected! 
Dec  4 18:34:36 mufumbo ppp[23209]: Phase: 2: opening -> dial 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Phone: 2610100 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Send: ATZ\^M 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Expect(5): OK 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Received: \^M 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Received: OK\^M 
Dec  4 18:34:36 mufumbo ppp[23209]: Chat: Send: ATDT2610100\^M 
Dec  4 18:34:38 mufumbo ppp[23209]: Chat: Expect(45): CONNECT 
Dec  4 18:35:05 mufumbo ppp[23209]: Chat: Received: \^M 
Dec  4 18:35:05 mufumbo ppp[23209]: Chat: Received: CONNECT 33600/ARQ/V34/LAPM/V42BIS\^M 
Dec  4 18:35:05 mufumbo ppp[23209]: Phase: 2: dial -> carrier 
Dec  4 18:35:06 mufumbo ppp[23209]: Phase: 2: /dev/cua02: CD detected 
Dec  4 18:35:06 mufumbo ppp[23209]: Phase: 2: carrier -> login 
Dec  4 18:35:06 mufumbo ppp[23209]: Phase: 2: login -> lcp 
Dec  4 18:35:06 mufumbo ppp[23209]: Chat: 1: Redial timer expired. 
Dec  4 18:35:07 mufumbo ppp[23209]: Phase: 1: /dev/cua01 is in use 
Dec  4 18:35:07 mufumbo ppp[23209]: Chat: Failed to open device 
Dec  4 18:35:07 mufumbo ppp[23209]: Phase: 1: Enter pause (30) for redialing. 
Dec  4 18:35:13 mufumbo ppp[23209]: Phase: bundle: Authenticate 
Dec  4 18:35:13 mufumbo ppp[23209]: Phase: 2: his = PAP, mine = none 
Dec  4 18:35:13 mufumbo ppp[23209]: Phase: Pap Output: ig ******** 
Dec  4 18:35:14 mufumbo ppp[23209]: Phase: Pap Input: SUCCESS () 
Dec  4 18:35:14 mufumbo ppp[23209]: Phase: 2: lcp -> open 
Dec  4 18:35:14 mufumbo ppp[23209]: Phase: bundle: Network 
Dec  4 18:35:37 mufumbo ppp[23209]: Chat: 1: Redial timer expired. 
Dec  4 18:35:37 mufumbo ppp[23209]: Phase: 1: /dev/cua01 is in use 
Dec  4 18:35:37 mufumbo ppp[23209]: Chat: Failed to open device 
Dec  4 18:35:37 mufumbo ppp[23209]: Phase: 1: Enter pause (30) for redialing.

---------------------------------------------
the problem is this:
i can connect both modems to the internet
but i can't multilink them

in linux the EQL redirect ppp0 and ppp1 for eql0 for example
but in BSD's i can't do that
i don't know how i do that.. if someone have some manual page for me send-me
please
Sorry for post this question in tech_(_at_)_openbsd_(_dot_)_org, but the people in
misc_(_at_)_openbsd_(_dot_)_org can't help me.. i tryed.. please if someone know send mail to
me at ixonz_(_at_)_uol_(_dot_)_com_(_dot_)_br or add me in icq 6838995


-- 
---------------------------------------------
Name: Rafael Sanches
Nickname: rakov
email: ixonz_(_at_)_uol_(_dot_)_com_(_dot_)_br
uin: 6838995