[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

2.8 snapshot (floppy28.fs) of Oct 13 panics on xl0...



Hello,
thought to look at newer stuff, but was confused with kernel panic
during xl0 attach. This machine successfully ran 2.5, 2.7, but pre-2.8
stuff seems to have some caveats, for example boot program hangs when
i give it command "help" with following screen:

reading boot.......
probing: pc0 com0 com1 apm mem [636K 31M a20=on]
disk: fd0 hd0 hd1 hd2
>> OpenBSD/i386 BOOT 1.24
boot> help
commands: # boot echo env help ls machine reboot set stty time
machine: boot _ <--- cursor

and kernel's panic looks like (hmm, it can contain some mistakes):

real mem = 33144832 (32368K)
avail mem = 26841088 (26212K)
using 430 buffers containing 1761280 bytes (1720K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(51) BIOS, date 12/08/94, BIOS32 rev. 0 @ 0xfdb22
apm0 at bios0: Power Management spec V1.0
pcibios0 at bios0: rev. 2.0 found at 0xfd9e0 [0x62]
pcibios0: pcibios_get_intr_routing - function unsupported
pcibios0: PCI IRQ Routing information unavailable.
pcibiod0: PCI bus #0 is the last bus
pci0 at mainbus0: configuration mode 1
pchb0 at pci0 dev 16 function 0 "UMC UM8881F PCI-Host" rev 0x01
"UMC UM8886F PCI-ISA" rev 0x01 at pci0 dev 18 function 0 not configured
"S3 Trio32/64" rev 0x54 at pci0 dev 23 function 0 not configured
xl0 at pci0 dev 24 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11 address 00:10:4b:07:ce:21
exphy0 at xl0 phy 24: 3Com internal media interface
fatal page fault in supervisor mode
trap type 6 code 2 eip e01673ee cs 8 eflags 10286 cr2 0 cpl 0
panic: trap

The operating system has halted.
Please press any key to reboot.



-- 
Denis A. Doroshenko -- VAS/IN engineer
[Address: Omnitel Ltd., T.Sevcenkos 25, Vilnius 2600, Lithuania]
[Phone: +370 98 63207] [E-mail: mailto:d_(_dot_)_doroshenko_(_at_)_omnitel_(_dot_)_net]




Visit your host, monkey.org