[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ICP Vortex


I tried to do what they said in:

But I can't have a sd0 device configured to install Open on it.

Any idea??




OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
cpu0: disabling processor serial number
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 451

real mem  = 133791744 (130656K)
avail mem = 119476224 (116676K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(aa) BIOS, date 03/03/00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"ATI Technologies Rage Pro" rev 0x5c at pci1 dev 0 function 0 not
fxp0 at pci0 dev 3 function 0 "Intel 82557" rev 0x05: irq 12, address
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01:
DMA, channel 0 wir
ed to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-305020>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 19623MB, 16383 cyl, 16 head, 63 sec, 40188960
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 4 function 2 not
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 4 function
3 not configured
gdt0 at pci0 dev 16 function 0 "Vortex Computer Systems
GDT6117RP/GDT6517RP" rev 0x05: pc
i_mem_find: expected mem type 00000002, found 00000000
cannot map DPMEM
ppb1 at pci0 dev 20 function 0 "DEC DECchip 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
fxp1 at pci2 dev 4 function 0 "Intel 82557" rev 0x05: irq 11, address
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
fxp2 at pci2 dev 5 function 0 "Intel 82557" rev 0x05: irq 10, address
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 0
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0: irq 12 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 5c40 ttymask 5c42
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Visit your host, monkey.org