playing with -current

[Gregory Steuck <steuck_(_at_)_iname_(_dot_)_com>]

Booted Aug 16th bsd, noticed several things:

1) wd1 is not recognized => no CD drive
2) usb takes irq3 => no pccom1
3) sound card doesn't work.

New dmesg is attached. To give you an idea of my hardware configuration, 
dmesg from June snapshot is also attached.

OpenBSD 2.5-current (GENERIC) #582: Mon Aug 16 15:25:18 MDT 1999
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 338 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 654336 conventional, 163840000 extended
real mem  = 164495360
avail mem = 149315584
using 2033 buffers containing 8327168 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8f) BIOS, date 10/09/98
bios0: apminfo 0xf051d00c diskinfo 0xf051d034 cksumlen 1 memmap 0xf051d0b0
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Matrox MGA Millennium G200 AGP" rev 0x01 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DTTA-350840>
wd0: 16-sector PIO, LBA, 8063MB, 16383 cyl, 16 head, 63 sec, 16514064 sectors
wd0: 32-bit, supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB Host (PIIX4)" rev 0x01: irq 3 version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0:  UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 4 function 3 not configured
pn0 at pci0 dev 11 function 0 "Lite-On PNIC" rev 0x21: irq 10 address 00:a0:cc:3e:57:1f
pn0: autoneg complete, link status good (half-duplex, 10Mbps)
isa0 at mainbus0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1: irq 3 already in use
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 <Creative ViBRA16C PnP, CTL0001, , Audio> port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5sb1: can't create map for drq 1
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
audio: could not allocate play buffer
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 <Creative ViBRA16C PnP, CTL7001, PNPB02F, Game> port 0x200/8
biomask 4048 netmask 4448 ttymask 54ca
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: initialized.  Default = pass all, Logging = enabled

OpenBSD 2.5-current (HOME) #5: Wed Jun 23 10:15:18 PDT 1999
    root_(_at_)_home_(_dot_)_nest_(_dot_)_cx:/usr/src/sys/arch/i386/compile/HOME
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 338 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 654336 conventional, 163840000 extended
real mem  = 164495360
avail mem = 151547904
using 2033 buffers containing 8327168 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8f) BIOS, date 10/09/98
bios0: apminfo 0xf02f600c diskinfo 0xf02f6034 cksumlen 1 memmap 0xf02f60b0
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Matrox MGA Millennium G200 AGP" rev 0x01 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 4 function 1 not configured
"Intel 82371AB USB Host (PIIX4)" rev 0x01 at pci0 dev 4 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 4 function 3 not configured
pn0 at pci0 dev 11 function 0 "Lite-On PNIC" rev 0x21: irq 10 address 00:a0:cc:3e:57:1f
pn0: autoneg complete, link status good (half-duplex, 10Mbps)
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <IBM-DTTA-350840>
wd0: 8063MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sec, 16514064 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (467KB cache)
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
acd0 at atapibus1 drive 1: <CD-ROM CDU77E, 1.0e> ATAPI 5/cdrom removable
acd0: 689Kb/sec, 128Kb cache, audio play, 256 volume levels
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12: IntelliMouse
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 <Creative ViBRA16C PnP, CTL0001, , Audio> port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.13
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 <Creative ViBRA16C PnP, CTL7001, PNPB02F, Game> port 0x200/8
biomask c060 netmask c460 ttymask d462
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: initialized.  Default = pass all, Logging = enabled