mysql-3.22.22 port compile error

[Jesse Trucks <jtrucks_(_at_)_madison_(_dot_)_com>]

I cannot get mysql from the ports tree to compile correctly on the
following system:

	uname:

# uname -ap
OpenBSD ruth 2.5 GENERIC#309 i386 Intel Pentium II ("GenuineIntel"
686-class, 512KB L2 cache)

	dmesg:

# dmesg 
OpenBSD 2.5-current (GENERIC) #309: Tue Jun 29 23:46:33 MDT 1999
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 351 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 654336 conventional, 66060288 extended
real mem  = 66715648
avail mem = 58593280
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(56) BIOS, date 01/28/99
bios0: apminfo 0xf04c000c diskinfo 0xf04c0034 cksumlen 1 memmap 0xf04c00b0
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Matrox MGA Millennium G200 AGP" rev 0x01 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function
3 not configured
xl0 at pci0 dev 15 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10
address 00:50:04:9b:79:3d
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
acd0 at atapibus0 drive 1: <  44X CD-ROM, MT1102  Firmware, VER 4.4A 
44X CD-ROM> ATAPI 5/cdrom removable
acd0: 1375/4125Kb/sec, 128Kb cache, audio play, 255 volume levels
wd0 at wdc0 drive 0: <WDC AC14300R>
wd0: 4112MB, 8912 cyl, 15 head, 63 sec, 512 bytes/sec, 8421840 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (512KB cache)
sb0 at isa0 port 0x220-0x237 irq 7 drq 1: dsp v4.13
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378-0x37b: polled
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 40c0 netmask 44c0 ttymask 54c2
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302

	Updated source via CVS as of this morning.

	ulimit:
# ulimit -a
core file size (blocks)     unlimited
data seg size (kbytes)      131072
file size (blocks)          unlimited
max locked memory (kbytes)  18652
max memory size (kbytes)    55952
open files                  64
pipe size (512 bytes)       1
stack size (kbytes)         2048
cpu time (seconds)          9000
max user processes          80
virtual memory (kbytes)     133120

	Added --with-low-memory option in Makefile

	The error occurs when I do a make install and it hits the sql_yacc.cc
file, the system nearly locks up and cannot be used at all unless a
CTRL-C is done inthe window it is compiling in.

	Anyone have an idea? Do I need to update the system to current, or
build my own?

-- 
Jesse Trucks
jtrucks_(_at_)_madison_(_dot_)_com
Online Technical Producer
Madison Newspapers, Inc. - http://www.madison.com/