using ppp

[Steve Slater <slater_(_at_)_nuc_(_dot_)_berkeley_(_dot_)_edu>]

Can anyone give any clues to what I may be missing? I tried to use ppp
to dialin to my ISP. I set the line and device like in the man page,
dial and connect. After loggin int, ppp detects the connection, the
probmpt goes from ppp to PPP, a default router is added as is
the tun0 interface.

The only problem is that no traffic flows. tcpdump on tun0 shows
nothing more than time stamps a copule times. the show lcp command
shows:

PPP ON slater2> show lcp
LCP [Opened]
 his side: MRU 1006, ACCMAP 000a0000, PROTOCOMP 1, ACFCOMP 1,
           MAGIC 00000000, REJECT 0000
 my  side: MRU 1500, ACCMAP 00000000, PROTOCOMP 1, ACFCOMP 1,
           MAGIC 623705f6, REJECT 8a0000

Defaults:   MRU = 1500, ACCMAP = 00000000       Open Mode: active
(delay1)


However, if I script this connection in a chat script and
use pppd it works fine. 

Is there some other command I need to issue with ppp that
tells the computer to GO or start working?

FYI, this is with OpenBSD 2.3 on a Laptop with a pcmcia modem.

Thanks,

Ste