[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Belkin wireless adapter
- To: misc_(_at_)_openbsd_(_dot_)_org
- Subject: Re: Belkin wireless adapter
- From: "tony sarendal" <dualcyclone_(_at_)_gmail_(_dot_)_com>
- Date: Sat, 8 Apr 2006 20:58:46 +0100
On 08/04/06, tony sarendal <dualcyclone_(_at_)_gmail_(_dot_)_com> wrote:
> On 05/04/06, Jonathan Gray <jsg_(_at_)_goblin_(_dot_)_cx> wrote:
> > On Wed, Apr 05, 2006 at 02:07:54AM +0100, pedro la peu wrote:
> > > > The 0x705c has a ZyDAS ZD1211 chipset in it, the 0x7050 is Ralink.
> > >
> > > A Ralink based F5D7050 can be unambiguously identified via it's FCC
> > ID. It
> > > will be printed on the device (and IIRC the box). FCC ID K7SF5D7050A
> > is an
> > > RT25xx based device.
> > >
> > > ural0: Belkin Belkin 54g USB Network Adapter, rev 2.00/0.01, addr 2
> > > ural0: MAC/BBP RT2571 (rev 0x03), RF RT2526, address 00:11:50:nn:nn:nn
> > >
> > >
> > '
> > Right, RT2571 is the second generation USB Ralink wireless. It is
> > mostly
> > a total redesign like the rt2600 was for PCI/CardBus. It is quite
> > similiar
> > to the rt2600 in terms of register layout, efforts are underway to
> > support
> > them but are not yet complete.
> I seem to have gotten a FCC ID K7SF5D7050B.
> According to the pictures it has RT2571F and RT2526L in it. (Good link,
> ugen0 at uhub3 port 1
> ugen0: Belkin Belkin 54g USB Network Adapter, rev 2.00/0.01, addr 2
> port 1 addr 2: high speed, power 300 mA, config 1, Belkin 54g USB Network
> Adapter(0x705a), Belkin(0x050d), rev 0.01
> Lets see if it works by just updating usbdevs and usb/if_ral.c
No such luck.
ural0 at uhub3 port 1
ural0: Belkin Belkin 54g USB Network Adapter, rev 2.00/0.01, addr 2
ural0: MAC/BBP RT2573 (rev 0x00), RF unknown, address 00:11:50:nn:nn:nn
Time for a beer.
Tony Sarendal - tony_(_at_)_polarcap_(_dot_)_org
-= The scorpion replied,
"I couldn't help it, it's my nature" =-