Re: ccd mirroring and ccdxc

[Bobby Johnson <bobby_(_at_)_plexuscomp_(_dot_)_com>]

Right, this is what I did as well.  Tested.  Works much better than the
previous config.

Any thoughts on monitoring the status of the ccd?

Bobby Johnson

On Wed, 2005-12-28 at 21:28 +0100, kami petersen wrote:
> Nick Holland skrev:
> 
> > (hint: you can do a CCD of just one disk).
> > (hint 2: you can't use the same partition twice, it will generate an error).
> > (hint 3: Errors can be your friend, they are not always to be avoided)
> 
> warning, spoiler below:
> 
> #
> # /etc/ccd.conf
> # Configuration file for concatenated disk devices
> #
> 
> # ccd           ileave  flags           component devices
> ccd0            16      CCDF_MIRROR     /dev/sd2e /dev/sd3e
> ccd0            16      none            /dev/sd2e
> ccd0            16      none            /dev/sd3e
> 
> 
> now shut down, unplug sd2 and boot. at your own risk.
> 
> regards,
> kami petersen