[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

fujitsu lifebook s7000 (s7020)

while it is possible to make this laptop go, the installation procedure is 
not for the faint of heart.

my experience went something like this, using a usb floppy.

1.  boot floppy A to assess situation
	no network and no harddrive
	bge isn't in config, easy to fix
	intel sata support has issues
	build custom kernel, with pciide.c rolled back to 1.216
2.  boot custom floppy
	seems like we're ready
3.  get ntfsprogs to build on openbsd
	not too hard, but kinda surprsing.  highlight:
	/* FIXME: this is a workaround for loosing debug info if stdout != 
	stderr and for the uncontrollable verbose messages in libntfs. 
	Ughhh. */
	stderr = stdout;
4.  put ntfsresize on usb mem stick, transfer to new laptop.
	didn't want to work.  remove safety checks from source,
	try again, now we're going.
5.  install.
	this went fine, but make sure you get the sector count for fdisk 
	right.  put openbsd.pbr on usb for ntldr.
6.  reboot.
	ntldr (or openbsd.pbr more likely) wasn't happy.  bootpart worked
7.  panic
	can't find disk.  build bsd new kernel with pciide.c backout, 
	reboot from the floppy, pull down new bsd local machine, all good.
8.  startx
	scrambles screen, then hangs.  X -configure works, but have to 
	change i810 driver to vesa, then we get 1280x1024.  should be
9.  915resolution
	program to patch video bios with new resolutions.  written for 
	linux.  best part of port:  linux has data and port arguments for 
	outl and so on backwards.  like, wtf?  after overwriting one of 
	the modes with 1400x1050, got a good image.  this may get fixed
	in a later X.org release, but for now it's pretty messed up.

no apm, no est (yet), no audio (yet).  total installation time was 
something like 20 times what i average on more conventional hardware.

OpenBSD 3.8-current (GENERIC) #1: Sat Dec 10 15:30:33 PST 2005
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: Enhanced SpeedStep 1500 MHz (1308 mV) (not in table)
real mem  = 526426112 (514088K)
avail mem = 473432064 (462336K)
using 4278 buffers containing 26423296 bytes (25804K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(40) BIOS, date 10/24/05, BIOS32 rev. 0 @ 0xfd5f0
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf200! 0xcf800/0x1000 0xd0800/0x1600 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x04: aperture at 0xb0080000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x04 at pci0 dev 2 function 1 not configured
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x21, unknown BCM5750 (0x4201): irq 11, address 00:0b:5d:c8:c3:4d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
cbb0 at pci3 dev 3 function 0 vendor "O2 Micro", unknown product 0x7134 rev 0x20: irq 11
iwi0 at pci3 dev 5 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq 11, address 00:13:ce:9a:ca:fb
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci3 dev 6 function 0 not configured
cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA770 DVD/CDRW, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel 0 wired to native-PCI, channel 1 wired to compatibility
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FUJITSU MHV2040BH>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ef6d netmask ef6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted

die energie aus fleisch und blut        deine sprache und die ganze wut
deine gefuehle die du lebst             und dein herz fuehl wie es bebt
zeitbombe! sie tickt in dir    zeitbombe! sie explodiert in deinem kopf
                                                    - girls under glass

Visit your host, monkey.org