[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

dmesg Panasonic Toughbook CF-72



Hello,

Here is the dmesg for my Panasonic Toughbook CF-72.  When booting the
install cd, I had to disable ahc else the boot would hang.

I also have not got the aironet 350 working.  Any assistance would be
appreciated.
dmesg says
"Aironet MPI-350 Wireless" rev 0x00 at pci2 dev 3 function 0 not configured



full dmesg follows________________________________________

OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel"
686-class) 1.20 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 804298752 (785448K)
avail mem = 726609920 (709580K)
using 4278 buffers containing 40316928 bytes (39372K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(10) BIOS, date 09/17/02, BIOS32 rev. 0 @ 0xfd870
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 99%
apm0: AC off, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd870/0x790
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1000 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 9
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0x80: irq 9
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 1 function 0 not configured
rl0 at pci2 dev 2 function 0 "Realtek 8139" rev 0x10: irq 9 address
00:80:45:22:bf:fd
rlphy0 at rl0 phy 0: RTL internal phy
"Aironet MPI-350 Wireless" rev 0x00 at pci2 dev 3 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x40
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configur
ed to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N030ATMR04-0>
wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA720 DVD/CDRW, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02:
irq 9, ICH3 AC97
ac97: codec id 0x83847656 (SigmaTel STAC9756/57)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

--
The only way to keep your health is to eat what you don't want, drink
what you don't like, and do what you'd rather not.
- Mark Twain