OpenBSD and hp/compaq DL360-G4, SATA support

[SeDoFa <sedofa_(_at_)_gmail_(_dot_)_com>]

Hello,

I tried to install openbsd3.7 on a proliant dl360-g4p.
The dl360 has a "Intel SATA  6300ESB/82801FR"

Unfortunately the install stop after "Proceed with install?". The error
message is: "No disks found".

At this time, is it possible to install openbsd on proliant dl360 with
Intel SATA  6300ESB/82801FR Controller?

This is the dmesg


OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,CNXT-ID
real mem  = 2147012608 (2096692K)
avail mem = 1954197504 (1908396K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x3600!
0xcce00/0x1800 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
em0 at pci3 dev 1 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 5, address: 00:11:0a:57:e3:14
em1 at pci3 dev 1 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 5, address: 00:11:0a:57:e3:15
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 4
ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 6
bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, unknown
BCM5704 (0x2100): irq 5 address 00:13:21:ae:a7:f7
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, unknown
BCM5704 (0x2100): irq 5 address 00:13:21:ae:a7:f6
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci7 at ppb6 bus 7
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "Compaq", unknown product 0xb203 (class system subclass
miscellaneous, rev 0x01) at pci7 dev 4 function 0 not configured
vendor "Compaq", unknown product 0xb204 (class system subclass
miscellaneous, rev 0x01) at pci7 dev 4 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-C, C.8D> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: couldn't map channel 0 cmd regs
pciide1: couldn't map channel 1 cmd regs
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ffc5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02


Many thanks

Max