[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

vlan0: initialized with non-standard mtu 1496 (parent fxp1)



Hello,

I have just installed a OpenBSD 3.7 as main router (upgrading from 3.6 to
3.7).

On OpenBSD 3.6 the following interfaces didn't bother me, but on 3.7 it
seems that fxp driver don't allow me anymore to make VLANs on fxp1 to
fxp2.

here is extract of dmesg (GENERIC.MP / i386 kernel) :

fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x08, i82559: irq 5,
address 00:02:b3:23:86:2a
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 13 function 0 "Intel 82557" rev 0x08, i82559: irq 5,
address 00:02:b3:23:86:2b
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ppb0 at pci0 dev 14 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci1 at ppb0 bus 1
fxp2 at pci1 dev 0 function 0 "Intel 82557" rev 0x05, i82558: irq 7,
address 00:e0:b6:01:ce:59
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 0
fxp3 at pci1 dev 1 function 0 "Intel 82557" rev 0x05, i82558: irq 5,
address 00:e0:b6:01:ce:58
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 0
fxp4 at pci1 dev 2 function 0 "Intel 82557" rev 0x05, i82558: irq 11,
address 00:e0:b6:01:ce:57
inphy4 at fxp4 phy 1: i82555 10/100 PHY, rev. 0
fxp5 at pci1 dev 3 function 0 "Intel 82557" rev 0x05, i82558: irq 10,
address 00:e0:b6:01:ce:56
inphy5 at fxp5 phy 1: i82555 10/100 PHY, rev. 0

vlan0: initialized with non-standard mtu 1496 (parent fxp1)
vlan2: initialized with non-standard mtu 1496 (parent fxp2)
vlan3: initialized with non-standard mtu 1496 (parent fxp2)
vlan4: initialized with non-standard mtu 1496 (parent fxp1)
vlan5: initialized with non-standard mtu 1496 (parent fxp2)
vlan6: initialized with non-standard mtu 1496 (parent fxp2)
vlan7: initialized with non-standard mtu 1496 (parent fxp2)
vlan8: initialized with non-standard mtu 1496 (parent fxp2)

Can you give me a hint about that ?

Thanks,
/Xavier

-- 
Quand on essaye continuellement, on finit par y arriver. Donc, plus ca
rate, plus on a de chance que ca marche...
(Proverbe Shadok)