[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Install 3.7 on Compaq Proliant 2500 failed



Kevin <spytag_(_at_)_gmail_(_dot_)_com> writes:

> > - Compaq Proliant 2500
> > - bi-processors motherboard, but only one installed (Pentium Pro_(_at_)_200MHz)
> > - 256 MB RAM
> > - 3 x 4,3 GB Ultra-Wide SCSI hard drives
> > - Symbios Logic 53c875 SCSI Host Adapter
> > - Compaq SMART-2/P RAID controller
> > - Compaq Netelligent PCI Lan Adapter
> > 
> > Somebody can help me for this one?
> 
> Francois,
> 
> We have a pair of ML530s that do similar fun stuff, and at the first
> boot they require (when you're already doing a boot -c, I see) that I
> change siop to be -1, 0, 0 AFAIR. If those settings are incorrect just
> let me know I can look it up for you later, but I believe this will at
> least put you on the right track where you can (at least) play with
> the siop settings a couple of times 'til it gets on its feet.
> 
> Best,
> Kevin
> 

Thanks Kevin for your help.

Booting with bsd.rd did the trick :-)

Francois
-- 
http://www.chambaud.org



Visit your host, monkey.org