[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

OpenBSD 3.8-beta Alpha panic with pppoe



Hello List,
I am unable to get pppoe to work with an alpha that I want to use as a firewall. It panics


amap_wipeout: corrupt amap

when I connect the ADSL Speedstream modem to any of the three nic's.

I have used the same hostname.pppoe0 and ppp.conf files with the same modem and a secondary nic on an i386 successfully.

My assumption is this is hardware related to the alpha and not OpenBSD.

Would anyone be able to check this out and verify this or let me know how I can correct this error. Would ukc > disable amap work?

I Googled this and did not find any information on this.

Thank you,

rogern

John 3:16



ppp.conf

	pppoedev de1
	!/sbin/ifconfig de1 up
!/usr/sbin/spppcontrol \$if myauthproto=pap myauthname=xxxxxx \
		myauthkey=xxxxxx
	!/sbin/ifconfig \$if inet 0.0.0.0 0.0.0.1 netmask 0xffffffff
	!/sbin/route add default 0.0.0.1
	up

	default:
	set log Phase Chat LCP IPCP CCP tun command
	set redial 15 0
	set reconnect 15 0

	pppoe:
	set device "!/usr/sbin/pppoe -i de1"
	disable acfcomp protocomp
	deny acfcomp
	set mtu max 1492
	set speed sync
	enable lqr
	set lqrperiod 5
	set cd 5
	set dial
	set login
	set timeout 0
	set authname xxxxxx <http://by104fd.bay104.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000005&a=d9d1a96b13850385229d6349db56a66cb301e5b1c03f299849ee88a783abf3a5&mailto=1&to=baypos_(_at_)_sbcglobal_(_dot_)_net&msg=905312EE-3B52-4260-B863-71F6B0932ECB&start=0&len=71831&src=&type=x>
	set authkey xxxxxx
	add! default HISADDR
	enable dns
	enable mssfixup	


Script started on Fri Sep 2 17:09:14 2005 # cu -l tty00Connected ^C
DKA0
DKA0 is not executable
boot DKA0
(boot dka0.0.0.1004.0 -flags a)
block 0 of dka0.0.0.1004.0 is a valid boot block
reading 15 blocks from dka0.0.0.1004.0
bootstrap code read in
base = 1d8000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1ca000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

OpenBSD/Alpha Primary Boot
...OpenBSD/Alpha boot 1.7
VMS PAL rev: 0x1000000010114, OSF PAL rev: 0x1000000020116
Loading bsd...

[ using 471328 bytes of bsd ELF symbol table ]

consinit: not using prom console

Copyright (c) 1982, 1986, 1989, 1991, 1993

	The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2005 OpenBSD. All rights reserved.  http://www.OpenBSD.org


OpenBSD 3.8-beta (GENERIC) #573: Tue Aug 23 02:20:28 MDT 2005

   deraadt_(_at_)_alpha_(_dot_)_openbsd_(_dot_)_org <http://by104fd.bay104.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000005&a=d9d1a96b13850385229d6349db56a66cb301e5b1c03f299849ee88a783abf3a5&mailto=1&to=deraadt_(_at_)_alpha_(_dot_)_openbsd_(_dot_)_org&msg=905312EE-3B52-4260-B863-71F6B0932ECB&start=0&len=71831&src=&type=x>:/usr/src/sys/arch/alpha/compile/GENERIC

Digital Personal WorkStation 500au, 500MHz

8192 byte page size, 1 processor.

total memory = 134217728 (131072K)

(1941504 reserved for PROM, 132276224 used by OpenBSD)

avail memory = 109191168 (106632K)

using 1614 buffers containing 13221888 bytes (12912K) of memory

mainbus0 (root)

cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)

cpu0: Architecture extensions: 1<BWX>

cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1

cia0: extended capabilities: 1<BWEN>

cia0: using BWX for PCI config and bus access

pci0 at cia0 bus 0

de0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0

de0: DEC  pass 3.0 address 00:00:f8:76:73:52

sio0 at pci0 dev 7 function 0 "Contaq Microsystems CY82C693U ISA" rev 0x00

pciide0 at pci0 dev 7 function 1 "Contaq Microsystems CY82C693U ISA" rev 0x00:
DMA, channel 0 wired to compatibility

pciide0: channel 0 disabled (no drives)

pciide1 at pci0 dev 7 function 2 "Contaq Microsystems CY82C693U ISA" rev 0x00:
no DMA, channel 0 wired to compatibility

atapiscsi0 at pciide1 channel 0 drive 0

scsibus0 at atapiscsi0: 2 targets

cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6302B, 1017> SCSI0 5/cdrom
removable

cd0(pciide1:0:0): using PIO mode 4

ohci0 at pci0 dev 7 function 3 "Contaq Microsystems CY82C693U ISA" rev 0x00: isa
irq 10, version 1.0, legacy support

usb0 at ohci0: USB revision 1.0

uhub0 at usb0

uhub0: Contaq Microsys OHCI root hub, rev 1.00/1.00, addr 1

uhub0: 2 ports with 2 removable, self powered

tga0 at pci0 dev 11 function 0 "DEC TGA2" rev 0x22: TGA2 pass 2, board type
T8-02

tga0: 1024 x 768, 8bpp, Bt485 RAMDAC

tga0: interrupting at dec 550 irq 4

wsdisplay0 at tga0 mux 1

wsdisplay0: screen 0 added (std, vt100 emulation)

ppb0 at pci0 dev 20 function 0 "DEC 21152 PCI-PCI" rev 0x03

pci1 at ppb0 bus 1

isp0 at pci1 dev 4 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 3

isp0: invalid NVRAM header

scsibus1 at isp0: 16 targets

sd0 at scsibus1 targ 0 lun 0: <DEC, RZ2CC-KA (C) DEC, 5520> SCSI2 0/direct fixed

sd0: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8380080 sec total

sd1 at scsibus1 targ 1 lun 0: <DEC, RZ2CC-KB (C) DEC, DC2B> SCSI2 0/direct fixed

sd1: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8380080 sec total

de1 at pci1 dev 8 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 12

de1: DEC DE500-BA  pass 3.0 address 08:00:2b:c3:c9:01

de2 at pci1 dev 9 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 16

de2: DEC DE500-BA  pass 3.0 address 08:00:2b:c3:c3:d8

isa0 at sio0

vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072

wsdisplay1 at vga0 mux 1

wsdisplay1: screen 0-5 added (80x25, vt100 emulation)

isadma0 at isa0

com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

com0: console

com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

pckbc0 at isa0 port 0x60/5

pcppi0 at isa0 port 0x61

midi0 at pcppi0: <PC speaker>

spkr0 at pcppi0

isabeep0 at pcppi0

lpt0 at isa0 port 0x3bc/4 irq 7

fdc0 at isa0 port 0x3f0/6 irq 6 drq 2

fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec

mcclock0 at isa0 port 0x70/2: mc146818 or compatible

stray isa irq 15

root on sd0a swap on sd0b

rootdev=0x800 rrootdev=0x800 rawdev=0x802

swapctl: adding /dev/sd1b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd1e: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
setting tty flags
stray isa irq 3

vm.swapencrypt.enable: 1 -> 1
starting network
DHCPREQUEST on de0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.32 -- renewal in 1296000 seconds.
pppoe0: phase establish

add net default: gateway 0.0.0.1
pppoe0: phase network

starting system logger
starting rpc daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
building ps databases: kvm devData modified on freelist: word 0 of object
0xfffffe00000df390 size 0x10 previous type free (0x0 != 0xdeadbeef)

.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Fri Sep  2 17:10:06 PDT 2005
Data modified on freelist: word 0 of object 0xfffffe00000f1010 size 0x10
previous type free (0x0 != 0xdeadbeef)
OpenBSD/alpha (stephen.Joshua.local) (tty00)

login: rogern
Password:
panic: amap_wipeout: corrupt amap

Stopped at      Debugger+0x4:   ret     zero,(ra)

RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!

DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!

ddb> trace

Debugger(0, fffffc0000787940, 5, 8, 3, 8) at Debugger+0x4

panic(fffffc000071b234, 0, 1, 0, 1f, 0) at panic+0x130

amap_wipeout(?, 0, 1, 0, 1f, 0) at amap_wipeout+0x64

amap_unref(?, 0, 1, 0, 1f, 0) at amap_unref+0x48

uvm_unmap_detach(?, ?, ?, ?, 1f, 0) at uvm_unmap_detach+0x88

uvmspace_free(?, ?, ?, ?, ?, 0) at uvmspace_free+0x120

uvm_exit(?, ?, ?, ?, ?, 0) at uvm_exit+0x34

reaper(?, ?, ?, ?, ?, 0) at reaper+0xcc

start_reaper(?, ?, ?, ?, ?, 0) at start_reaper+0x18

netbsd_esigcode(?, ?, ?, ?, ?, 0) at netbsd_esigcode

PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND

17006      1      1      0  3      0x4084  ttyopn     getty

 5103      1   5103      0  2      0x4086             login

24270      1  24270      0  3      0x4086  ttyin      getty

13867      1  13867      0  3        0x84  select     cron

20008      1  20008      0  3        0x84  select     sshd

12346      1  12346      0  3       0x184  select     inetd

16557      1    915      0  3     0x44186  select     sendmail

 8908  21514  21514     73  3       0x184  poll       syslogd

21514      1  21514      0  3        0x84  netio      syslogd

13674      1  13674     77  3       0x184  poll       dhclient

 9588      1    915      0  3        0x86  poll       dhclient

   10      0      0      0  3    0x100204  crypto_wa  crypto

    9      0      0      0  3    0x100204  aiodoned   aiodoned

    8      0      0      0  3    0x100204  syncer     update

    7      0      0      0  3    0x100204  cleaner    cleaner

*    6      0      0      0  7    0x100204             reaper

    5      0      0      0  3    0x100204  pgdaemon   pagedaemon

    4      0      0      0  3    0x100204  pftm       pfpurge

    3      0      0      0  3    0x100204  usbtsk     usbtask

    2      0      0      0  3    0x100204  usbevt     usb0

    1      0      1      0  3      0x4084  wait       init