Buffalo WLI-U2-KG54 & ural - no interface

[Dirk Rösler <dirk_(_at_)_unicircuits_(_dot_)_com>]

Hello,

http://www.openbsd.org/macppc.html and i386.html show the Buffalo WLI- 
U2-KG54 supported with the ural driver.

However while the generic 3.7 release kernel sees the device, there  
is no associated ural interface showing up.

Note: Buffalo WLI-U2-KG54 is very similar to the Buffalo WLI-U2-KG54- 
AI (same RT2500 chipset, according to Buffalo, different PID WLI-U2- 
KG54-AI(0x006d), BUFFALO(0x0411))


from dmesg (I cannot get the whole message at the moment, so typing  
this line only):

ugen0: Buffalo WLI-U2-KG54, rev 2.00/0.01, addr 2

usbdevs output:

Controller /dev/usb5:
addr: high speed, self powered, config 1, EHCI root hub(0x0000), NEC 
(0x1033), rev 1.00
port 1 addr 2: high speed, power 300mA, config 1, WLI-U2-KG54 
(0x0066), Buffalo(0x0411), rev 0.01

Is there support in the latest snapshot for this device? All this is  
on macpcc (ibook).

Thanks

Dirk