[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: OpenBSD 3.7 on Soekris (w/ httpd)

On 7/27/05, Nick Holland <nick_(_at_)_holland-consulting_(_dot_)_net> wrote:
> If nothing else, dmesg tells us if someone is running a Theo-built
> kernel, a home-built GENERIC (which we have to take with a big grain of
> salt until we commit those changes that prevent even root from editing
> /usr/src/sys/arch/*/conf/GENERIC), or a definite Ricer, which are
> details that aren't always communicated accurately through other means.

> If in doubt, send the dmesg.  If you think it isn't necessary, send the
> dmesg. 

> Nick.
> (dmesg, dammit!)

In this vein, no one has put a Soekris 4801 kernel config file out
there that works with httpd, so wihtout further ado,

/usr/src/sys/arch/i386/conf/NET4801 (stripped for size, but thanks
mostly to chris_(_at_)_nmedia_(_dot_)_net):
machine         i386
option          DDB
option          DIAGNOSTIC
option          KTRACE
option          CRYPTO
option          SYSVMSG
option          SYSVSEM
option          SYSVSHM
option          FFS
option          MFS
option          TCP_SACK
option          FDESC
option          FIFO
option          KERNFS
option          PROCFS
option          INET
option          ALTQ
option          IPSEC
option          BOOT_CONFIG
option          I586_CPU
option          USER_PCICONF
maxusers        32
config          bsd     root on wd0a
mainbus0 at root
cpu0            at mainbus0 apid ?
bios0           at mainbus0 apid ?
apm0    at bios0 flags 0x0000
pcibios0 at bios0 flags 0x0000
isa0    at mainbus0
isa0    at pcib?
pci*    at mainbus0 bus ?
ohci*   at pci?
usb*    at ohci?
option          PCCOMCONSOLE
option          CONSPEED=19200
option          PCIVERBOSE
uhub*   at usb?
uhub*   at uhub? port ? configuration ?
umodem* at uhub? port ? configuration ?
ucom*   at umodem?
ugen*   at uhub? port ? configuration ?
pchb*   at pci? dev ? function ?
geodesc* at pci? dev ? function ?
nsclpcsio* at isa? port 0x2e
nsclpcsio* at isa? port 0x4e
gpio*   at nsclpcsio?
gscsio* at isa? port 0x2e
gscsio* at isa? port 0x15c
iic0    at gscsio?
iic1    at gscsio?
lmtemp0 at iic1 addr 0x48
ppb*    at pci? dev ? function ?
pci*    at ppb? bus ?
pci*    at pchb? bus ?
pcib*   at pci? dev ? function ?
npx0    at isa? port 0xf0 irq 13
isadma0 at isa?
pccom0  at isa? port 0x3f8 irq 4
pccom1  at isa? port 0x2f8 irq 3
pciide* at pci ? dev ? function ? flags 0x0000
wdc0    at isa? port 0x1f0 irq 14 flags 0x00
wd*     at wdc? channel ? drive ? flags 0x0000
wd*     at pciide? channel ? drive ? flags 0x0000
sis*    at pci? dev ? function ?
nsphyter*       at mii? phy ?
hifn*   at pci? dev ? function ?
wi*     at pci? dev ? function ?
ath*    at pci? dev ? function ?
pseudo-device   crypto          1
pseudo-device   ksyms           1
pseudo-device   systrace        1
pseudo-device   pf
pseudo-device   pflog
pseudo-device   pfsync
pseudo-device   loop    2
pseudo-device   bpfilter 16
pseudo-device   tun     2
pseudo-device   enc     1
pseudo-device   bridge  2
pseudo-device   vlan    32
pseudo-device   gre     4
pseudo-device   pty     32
pseudo-device   gif     4

and dmesg:
OpenBSD 3.7 (NET4801) #1: Wed Jul 27 12:50:50 MST 2005
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: TSC disabled
real mem  = 133799936 (130664K)
avail mem = 119418880 (116620K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/41/22, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 10, address 00:00:24:c4:81:58
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 10, address 00:00:24:c4:81:59
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 10, address 00:00:24:c4:81:5a
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
"NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 1: <SAMSUNG CF/ATA>
wd0: 1-sector PIO, LBA, 996MB, 2041200 sectors
wd0(pciide0:0:1): using PIO mode 4
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq
11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at pcib0
isadma0 at isa0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbe7 netmask ffe7 ttymask ffe7
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Systems Programmer, Senior
Electrical & Computer Engineering
The University of Arizona