OpenBSD misc archive

• Thread Index

• RAID-1 Root + boot(8) on i386/amd64
  • From: Brian A. Seklecki
• Re: sguil and OpenBSD
  • From: Andreas Östling
• determine boot device after boot
  • From: Uwe Werler
• Re: SCSI and disk geometry
  • From: José M. Fandiño
• ADSL modem Amigo HMX - CA85UR - K8 (USB)
  • From: RGKärcher
• Re: Stopping Xorg cleanly on Mac Mini
  • From: Ray Percival
• Re: read-only storage media
  • From: Dan Bond
• Re: read-only storage media
  • From: Michael Haertjens
• Please help: DHCP over IPSec
  • From: C. L. Martinez
• panic in 3.7
  • From: Rafael Morales
• em0 and SMP problem
  • From: Michał Koc
• An incredibly stupid question...
  • From: Matt Singerman
• Re: Please help: DHCP over IPSec
  • From: C. L. Martinez
• German Umlauts
  • From: Oliver J. Morais
• Re: An incredibly stupid question...
  • From: Oliver Fuchs
• Re: em0 and SMP problem
  • From: Johan M:son Lindman
• Edquota alternative for setting quotas?
  • From: Robert Jacobs
• Re: German Umlauts
  • From: Hugo Villeneuve
• Re: em0 and SMP problem
  • From: Johan M:son Lindman
• procmail sets wrong permissions in /var/mail
  • From: Oliver Fuchs
• Re: [PMX:####] [PMX:VIRUS] Mail System Error - Returned Mail
  • From: qt-interest-request
• Dual Configuration for OpenBSD
  • From: Gustavo Rios
• OpenBSD torrent updating script available
  • From: andrew fresh
• Re: German Umlauts
  • From: Oliver J. Morais
• Re: Honesty needed...
  • From: Hannah Schroeter
• Re: openbsd and dietlibc
  • From: Fridtjof Busse
• OpenBSD at What The Hack 2005 Thursday 28 July till Sunday 31 July 2005 Netherlands
  • From: Wim Vandeputte
• Error "libtool: link: only absolute run-paths are allowed"
  • From: Zoong PHAM
• problem with postgresql on sparc64 (lack of working socket?)
  • From: Simon Dassow
• D-Link DWL-G630 Support
  • From: Seth Jackson
• Output of "top" - CPU% weirdness?
  • From: Oliver J. Morais
• Delivery reports about your e-mail
  • From: wk
• Mini-PC recommendation?
  • From: Frank Denis (Jedi/Sector One)
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Jacob Meuser
• Re: em0 and SMP problem 3.7 SMP DMESG and ifconfig
  • From: Michał Koc
• Re: Test
  • From: Nobody
• Gnu Assembler on Openbsd 3.7 "Operation not permitted"
  • From: Ted Hanna
• Re: Gnu Assembler on Openbsd 3.7 "Operation not permitted"
  • From: Ted Hanna
• Re: Gnu Assembler on Openbsd 3.7 "Operation not permitted"
  • From: Ted Hanna
• Spamd and your ISP
  • From: Bill Chmura
• Re: Output of "top" - CPU% weirdness?
  • From: Arnaud Bergeron
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Zoong PHAM
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Jacob Meuser
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Zoong PHAM
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Han Boetes
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Jacob Meuser
• DOT-Files in / ?
  • From: sebastian . rother
• Re: DOT-Files in / ?
  • From: viq
• Re: DOT-Files in / ?
  • From: sebastian . rother
• Re: DOT-Files in / ?
  • From: viq
• DELIVERY REPORTS ABOUT YOUR E-MAIL
  • From: jobs
• X TTF path problem
  • From: Mayuresh Kathe
• Re: DOT-Files in / ?
  • From: sebastian . rother
• Re: Output of "top" - CPU% weirdness?
  • From: Oliver J. Morais
• Re: procmail sets wrong permissions in /var/mail
  • From: jmc
• Re: DOT-Files in / ?
  • From: viq
• iwi driver timeout
  • From: Edd Barrett
• Change HW for AMD64
  • From: Romain GAILLEGUE
• Re: Error "libtool: link: only absolute run-paths are allowed"
  • From: Han Boetes
• Difficulty upgrading to 3.7
  • From: Aric Gregson
• pf and interface groups
  • From: Erik Wikström
• Re: Difficulty upgrading to 3.7
  • From: Ray Percival
• Re: Difficulty upgrading to 3.7
  • From: Avtar Gill
• Re: Mini-PC recommendation?
  • From: Frank Denis (Jedi/Sector One)
• Re: pf and interface groups
  • From: Erik Wikström
• Re: em0 and SMP problem 3.7 SMP DMESG and ifconfig
  • From: Brad
• Re: em0 and SMP problem 3.7 SMP DMESG and ifconfig
  • From: Avtar Gill
• Re: Change HW for AMD64
  • From: Siegbert Marschall
• Re: em0 and SMP problem 3.7 SMP DMESG and ifconfig
  • From: Michał Koc
• OpenBSD 3.7 + Bridge Wireless (Orinoco)
  • From: Roberto Gonzalez Azevedo
• OpenBSD with Linksys WRT54G
  • From: Alari Kask
• Re: OpenBSD with Linksys WRT54G
  • From: Tony
• Easiest way to include PHP in a release
  • From: Robert Jacobs
• Re: Easiest way to include PHP in a release
  • From: Clint M. Sand
• Re: OpenBSD torrent updating script available
  • From: Siju George
• Re: procmail sets wrong permissions in /var/mail
  • From: Oliver Fuchs
• Firewirestatus and more (backup strategy)..
  • From: sebastian . rother
• sleep patterns...
  • From: unixadmin99
• Re: sleep patterns...
  • From: Thanos Tsouanas
• Re: OpenBSD 3.7 + Bridge Wireless (Orinoco)
  • From: Brian J. Woods
• Re: sleep patterns...
  • From: Thanos Tsouanas
• Re: sleep patterns...
  • From: Thanos Tsouanas
• howto determine boot device?
  • From: Uwe Werler
• ath(4) support on sparc64
  • From: Edwin Steele
• Exceed XDMCP dispaly manager
  • From: Ioan Nemes
• Re: OpenBSD 3.7 + Bridge Wireless (Orinoco)
  • From: Pedro la Peu
• Re: Exceed XDMCP dispaly manager
  • From: Stephen Marley
• Ad hoc wireless network problem
  • From: Yannick Daffaud
• httpd -> 3.6->3.7
  • From: sebastian . rother
• PF & Citrix ICA
  • From: TheSG
• Re: PF & Citrix ICA
  • From: TheSG
• Re: em0 and SMP problem
  • From: Michał Koc
• altq, not really clear (yet!)
  • From: Wijnand Wiersma
• Re: em0 and SMP problem
  • From: Michał Koc
• Re: sleep patterns...
  • From: unixadmin99
• Re: sleep patterns...
  • From: viq
• Re: SIP soft phone
  • From: Mathieu Sauve-Frankel
• connect() taking 6 seconds?
  • From: Adam
• Re: Output of "top" - CPU% weirdness?
  • From: Arnaud Bergeron
• ami0: timeout with LSI SATA 150-4 Controller
  • From: Martín
• Re: Hidden "restore" space on laptop drives
  • From: Frank Bax
• Re: ath(4) support on sparc64
  • From: Martin Reindl
• What's NEXT?
  • From: STGT Intl.
• Building READMEs
  • From: viq
• OpenBSD on HP nx6110 notebook
  • From: Gleb Paharenko
• OT: hardware question
  • From: C. L. Martinez
• Re: sleep patterns...
  • From: imEnsion
• Your message to nsis awaits moderator approval
  • From: nsis-bounces
• Dual monitor for openbsd box
  • From: Gustavo Rios
• Re: Gnu Assembler on Openbsd 3.7 "Operation not permitted"
  • From: Julian Leyh
• Re: Output of "top" - CPU% weirdness?
  • From: Oliver J. Morais
• Re: sleep patterns...
  • From: imEnsion
• Re: Building READMEs
  • From: viq
• panic in 3.7 part II
  • From: Rafael Morales
• Re: Building READMEs
  • From: Adam Fabian
• Re: Building READMEs
  • From: viq
• 3.7 - in kernel pppoe
  • From: J.D. Bronson
• Blocked Message
  • From: SMTPAVSRV
• bridge panic on -current
  • From: Tamas TEVESZ
• Re: 3.7 - in kernel pppoe
  • From: Brad
• Re: Flash Plugin for Firefox
  • From: Jason Smith
• Re: Dual monitor for openbsd box
  • From: kroty
• Re: Dual monitor for openbsd box
  • From: Steve Shockley
• Problem with ste-interface
  • From: Fridtjof Busse
• Re: Building READMEs
  • From: viq
• Update account information
  • From: ps-confirm
• PF log and snort
  • From: Breno Leitão
• Re: OpenOffice, the next hurdle
  • From: Chris
• Re: PF, Bridge, and IP on bridged interface [more]
  • From: Jim Fron
• PF, Bridge, and IP on bridged interface [more]
  • From: Jim Fron
• Re: lpd and cupsd
  • From: Chris
• No sound from ESS SOLO-1
  • From: Chris
• Re: Newbie with Wireless woes
  • From: Chris
• ISAKMPD VPN w/ Cisco Concentrator
  • From: Paul Lussier
• Re: OPEN SOURCE MASTERPLANS
  • From: Paul Greene
• Re: pflog0, ICMP rule 4294967295/3(short)
  • From: Jim Fron
• Re: pflog0, ICMP rule 4294967295/3(short)
  • From: j-fron . q . public
• Re: OpenBSD "Visible" Bridge and NAT box -- strangeness and questions
  • From: j-fron . q . public
• Re: Very General ports and packages question.
  • From: Chris
• Re: Units for Check-interval in isakmd.conf?
  • From: Paul Lussier
• Re: Newbie with Wireless woes
  • From: Chris
• EMPRESA PRODUCTIVA DE CALIDAD Y SEGURA - Curso Productividad paraPyMEs con las 5Ss
  • From: capacitacion_empresarial
• Re: mozilla: can't load library 'libmozjs.so.1.0', can't load library 'libnspr4.so.1.0'
  • From: Breno Leitão
• OpenOffice, the next hurdle
  • From: Chris
• Re: PF, Bridge, and IP on bridged interface [more]
  • From: Jim Fron
• pflog0, ICMP rule 4294967295/3(short)
  • From: Jim Fron
• bridge changes traffic interface for pf, but not for tcpdump
  • From: Jim Fron
• Units for Check-interval in isakmd.conf?
  • From: Paul Lussier
• Very General ports and packages question.
  • From: Chris
• Openbsd log
  • From: Breno Leitão
• Re: Newbie with Wireless woes
  • From: Chris
• Update account information
  • From: aw-confirm
• Please Update Your Account Information
  • From: Wamu.com Update Center
• Re: OpenOffice, the next hurdle
  • From: Chris
• Newbie with Wireless woes
  • From: Chris
• spoofing question
  • From: Matt
• Bug in 'usermod'?
  • From: Maxim Bourmistrov
• Re: Question?
  • From: hellsop
• Interview: Theo de Raadt on Industry and Free Software
  • From: Matt Hildebrand
• Re: Mini-PC recommendation?
  • From: Frank Denis (Jedi/Sector One)
• Re: Units for Check-interval in isakmd.conf?
  • From: Chris
• Re: Flash Plugin for Firefox
  • From: Frank Denis (Jedi/Sector One)
• Semi-OT: Problems getting find to not recurse
  • From: C. Bensend
• problem with ftp-proxy
  • From: Ryan Corder
• Re: ISAKMPD VPN w/ Cisco Concentrator
  • From: Ray Percival
• OpenBSD "Visible" Bridge and NAT box -- strangeness and questions
  • From: Jim Fron
• [Fwd: Re: OpenBSD3.7 i386 unsupported hardware]
  • From: David J. Schuller
• Re: Dual monitor for openbsd box
  • From: Whyzzi
• Re: Question?
  • From: Matthias Kilian
• Re: Units for Check-interval in isakmd.conf?
  • From: Guðni Þór Björgvinsson
• Re: Release 3.7
  • From: Shawn K. Quinn
• help getting a macintosh centris 610 going
  • From: webstersixwebs
• Re: Semi-OT: Problems getting find to not recurse
  • From: C. Bensend
• Re: Dual monitor for openbsd box
  • From: Matthew Clarke
• Re: problem with ftp-proxy
  • From: Shawn K. Quinn
• Re: Semi-OT: Problems getting find to not recurse
  • From: Matthias Kilian
• PF, Interface-groups and nat
  • From: Erik Wikström
• Re: Dual monitor for openbsd box
  • From: Matthew Weigel
• Re: Semi-OT: Problems getting find to not recurse
  • From: Matthias Kilian
• Info on the CO Digest
  • From: noreply
• Re: Semi-OT: Problems getting find to not recurse
  • From: C. Bensend
• Re: C programming question
  • From: imEnsion
• Re: Biostar 220K (was Re: Mini-PC recommendation?)
  • From: Frank Denis (Jedi/Sector One)
• Re: Bug in 'usermod'?
  • From: Nicholas Marriott
• Re: C programming question
  • From: Stuart Henderson
• Deja-vu?
  • From: Jon Coller
• Re: Release 3.7
  • From: Lars Hansson
• Re: Dual monitor for openbsd box
  • From: Steve Shockley
• Gnome & KDE on OpenBSD
  • From: shashi
• Zaurus C3100
  • From: Theo de Raadt
• Re: Deja-vu?
  • From: Hannah Schroeter
• Important NOTICE
  • From: Lasalle Bank
• sound doesn't work
  • From: Paulo Santos
• raidctl -P all in /etc/rc
  • From: engineer
• Optimizing SQUID
  • From: Reza Muhammad
• sound now works but output is not correct
  • From: Paulo Santos
• Re: sound doesn't work
  • From: Josh Grosse
• Re: Flash Plugin for Firefox
  • From: Alexey E. Suslikov
• Re: Dual monitor for openbsd box
  • From: Whyzzi
• Re: sound now works but output is not correct
  • From: Whyzzi
• squid on openbsd 3.7
  • From: Askar Ali
• Re: Optimizing SQUID
  • From: hellsop
• Re: PF, Interface-groups and nat
  • From: Erik Wikström
• Re: squid on openbsd 3.7
  • From: Karsten McMinn
• Message could not be delivered
  • From: Returned mail
• Re: squid on openbsd 3.7
  • From: Shawn K. Quinn
• Multicast Forwarding
  • From: Mark Gangl
• Release/version/patch management question
  • From: Markus Wernig
• Your message to Rainbowfish awaits moderator approval
  • From: rainbowfish-admin
• Re: Building READMEs
  • From: Adam Fabian
• raid mirror VS cdd mirror
  • From: engineer
• sis ethernet has no MAC address
  • From: Charles Sprickman
• raidctl: fail (rebuild later) VS wait for parity
  • From: engineer
• Re: Building READMEs
  • From: viq
• Toshiba laptop 3.7 installation problem
  • From: Z L
• Re: PF, Interface-groups and nat
  • From: Henning Brauer
• syslogd-capabilities
  • From: M. Schatzl
• Abort trap after untar'ing src.tar.gz and sys.tar.gz
  • From: Adam Gleave
• Re: Abort trap after untar'ing src.tar.gz and sys.tar.gz
  • From: viq
• Re: squid on openbsd 3.7
  • From: Askar Ali
• Re: Abort trap after untar'ing src.tar.gz and sys.tar.gz
  • From: Bernd Schoeller
• OT: Does anyone have a use for this old hardware (free)
  • From: Edd Barrett
• Re: sis ethernet has no MAC address
  • From: Diana Eichert
• Ping: no buffer space available
  • From: Bolke de Bruin
• Re: raid mirror VS cdd mirror
  • From: Nick Holland
• Disk partition error
  • From: Dimitri Yioulos
• Re: raidctl: fail (rebuild later) VS wait for parity
  • From: engineer
• Re: raidctl: fail (rebuild later) VS wait for parity
  • From: engineer
• make release - bfd/mybfd.h - no such file
  • From: Jonas Melian
• Re: Disk partition error
  • From: Dimitri Yioulos
• LSI MegaRAID SATA 150-6
  • From: Michael Flanagan
• program(s) needed for an authentication server
  • From: Vivek Ayer
• Re: Disk partition error
  • From: Dimitri Yioulos
• Re: Disk partition error
  • From: L. V. Lammert
• Re: Disk partition error
  • From: Stuart Henderson
• Re: Disk partition error
  • From: Shawn K. Quinn
• Re: Abort trap after untar'ing src.tar.gz and sys.tar.gz
  • From: Adam Gleave
• Re: Disk partition error
  • From: Dimitri Yioulos
• Possible to completely/reliably backup/dump a live filesystem?
  • From: Adam Fabian
• Dear Member
  • From: PayPaL
• symon duplication
  • From: Bobby Johnson
• make build error on OpenBSD 3.7 (amd64 plataform)
  • From: Francisco Valladolid
• PF question.
  • From: Ikmal Ahmad
• Delivery reports about your e-mail
  • From: Post Office
• Turion : amd64 for notebooks
  • From: Ed White
• Policy Violation: Virus detected
  • From: Symantec_Mail_Security_for_SMTP
• iwi WIFI device timeout issue
  • From: Edd Barrrett
• 2 x Atheros Cards + VIA EPIA Mobo = Hard lock
  • From: Sevan / Venture37
• Re: make release - bfd/mybfd.h - no such file
  • From: Adam Fabian
• Re: ral0 problem
  • From: Matt Brenneke
• ich aus dem chat
  • From: abagaeldel3
• Re: ral0 problem
  • From: Matt Brenneke
• undeadly dead
  • From: sbr
• re-export nfs
  • From: George Georgalis
• ports & ports tools
  • From: Paul Tomlin
• Re: No DMA? What's going on here?
  • From: Shawn K. Quinn
• hw.setperf not available
  • From: bossk
• Re: Cross-Compiling OpenBSD
  • From: Sean Brown
• OT: searching a openbsd friend
  • From: Gustavo Rios
• Portuguese User Group Meeting
  • From: Nuno Morgadinho
• UK Keymap issue
  • From: Edd Barrett
• More to pcidevs
  • From: Maxim Bourmistrov
• Re: Building READMEs
  • From: viq
• Re: hw.setperf not available
  • From: bossk
• Re: Building READMEs
  • From: viq
• OpenBSD log server
  • From: Qv6
• Re: Building READMEs
  • From: viq
• Unlock your ACCOUNT
  • From: Lasalle Bank
• Re: OpenBSD log server
  • From: Steve Shockley
• OpenBSD environment need
  • From: Gustavo Rios
• ADSL with german t-online
  • From: Sebastian Benoit
• logserver configuration
  • From: Qv6
• Re: ADSL with german t-online
  • From: Alexander Farber
• vpncsetting routes problem
  • From: grumpa
• Re: ADSL with german t-online [SOLVED]
  • From: Sebastian Benoit
• NX support in VIA C7 ?
  • From: Pablo Méndez Hernández
• Improving routing performance
  • From: Fredrik Roubert
• This email confirms that you sent $67.00 USD to north_pools@yahoo.com
  • From: PayPal
• IPDPS 2005 Call for Papers
  • From: cfp
• Resultados de los comandos enviados por correo electronico
  • From: lista4x4-bounces
• [SMDA] Re: Returned mail: Data format error
  • From: Peter Lieven
• Re: Improving routing performance
  • From: knitti
• Re: ral0 problem
  • From: Peter N. M. Hansteen
• Re: Linksys EG1032 not SysKonnect anymore as of rev. 3
  • From: Johan P. Lindström
• PF does not work,why?
  • From: jking1
• =??B?UEYgZG9lcyBub3Qgd29yayx3aHk/?=
  • From: =??B?amtpbmcx?=
• Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)
  • From: Adam Fabian
• Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)
  • From: joshua stein
• Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)
  • From: Adam Fabian
• Re: Cross-Compiling OpenBSD
  • From: Nick Holland
• Openbsd 3.7's GAS assembler gave me a "sh: hello: Operation not permitted" =/
  • From: edgar mortiz
• Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)
  • From: Janne Johansson
• Re: Can't make 3.7-stable release (tries to exceed capacity of /dev/svnd0a?)
  • From: Kurt Miller
• sk gigabit NICs
  • From: Adam
• Delivery reports about your e-mail
  • From: phayes
• NX support in VIA C7 ?
  • From: Ted Unangst
• USB2 status?
  • From: Rene Rivera
• Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Jaime Fournier
• Re: USB2 status?
  • From: Rene Rivera
• Re: Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Shawn K. Quinn
• Re: Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Shawn K. Quinn
• Re: Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Jan Izary
• Re: Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Hannah Schroeter
• problems with hostroutes / arp routes
  • From: Michael Adam
• Re: Silly patch to allow alt + f[1-4] to switch consoles.
  • From: Han Boetes
• getting dhclient to update bind forwarders IPs
  • From: Raphaël Berbain
• round-robin question
  • From: Monah Baki
• Re: getting dhclient to update bind forwarders IPs
  • From: Jason Opperisano
• macutil confusion...
  • From: Mayuresh Kathe
• Re: undeadly dead
  • From: Jeffrey Lim
• Re: getting dhclient to update bind forwarders IPs
  • From: Alexander Bochmann
• =??B?UmU6UEYgZG9lcyBub3Qgd29yayx3aHk/?=
  • From: =??B?amtpbmcx?=
• links vs firefox vs ..
  • From: Vladislav Belogrudov
• Re: getting dhclient to update bind forwarders IPs
  • From: Stephen Marley
• Re: getting dhclient to update bind forwarders IPs
  • From: Raphaël Berbain
• Re: getting dhclient to update bind forwarders IPs
  • From: Raphaël Berbain
• What key length is used in blowfish hard disk encryption?
  • From: Stefan Ohletz
• wscons: any changes in the near future?
  • From: Vladislav Belogrudov
• Re: getting dhclient to update bind forwarders IPs
  • From: Alexander Bochmann
• Re: program(s) needed for an authentication server
  • From: Vivek Ayer
• Re: getting dhclient to update bind forwarders IPs
  • From: Alexander Bochmann
• Re: ISAKMPD VPN w/ Cisco Concentrator
  • From: Toni Mueller
• failure for hw.sensors.4: 12.52V not within limits
  • From: Rob Foster
• 3.7 install script - dhcp
  • From: Frank Bax
• Re: failure for hw.sensors.4: 12.52V not within limits
  • From: Henning Brauer
• Testimonial
  • From: Ray Percival
• mac os x client to isakmpd
  • From: Karl-Heinz Wild
• PacSec/core05 Call For Papers
  • From: Dragos Ruiu
• Re: 3.7 install script - dhcp
  • From: Frank Bax
• Re: Test
  • From: barrylippitt
• Audigy LS PCI (soundcard) support in 3.7/i386?
  • From: Anon Y. Mous
• Re: ral0 problem
  • From: Brad
• X.org with ATI-card on 3.7-current and release
  • From: Dunceor .
• Re: 3.7 install script - dhcp
  • From: viq
• Help required
  • From: Munir Ahmad
• fan control on AcerPower F1b
  • From: Daniel Polak
• Re: What key length is used in blowfish hard disk encryption?
  • From: Stefan Ohletz
• Re: links vs firefox vs ..
  • From: Vladislav Belogrudov
• Re: links vs firefox vs ..
  • From: Bernd Schoeller
• Re: Audigy LS PCI (soundcard) support in 3.7/i386?
  • From: Johan M:son Lindman
• Re: Cross-Compiling OpenBSD
  • From: chefren
• Re: links vs firefox vs ..
  • From: Hannah Schroeter
• Re: fan control on AcerPower F1b
  • From: Josh Grosse
• build KDE from scratch
  • From: Glamous
• mod_auth_kerb
  • From: Thierry Lacoste
• Re: links vs firefox vs ..
  • From: Vladislav Belogrudov
• Packages on custom CD
  • From: Alain Paschoud
• Re: links vs firefox vs ..
  • From: blahz0rz
• is it possible to NAT & BI-NAT on aliases on a NIC?
  • From: Steve Williams
• Re: build KDE from scratch
  • From: Christian Lecompte
• Re: is it possible to NAT & BI-NAT on aliases on a NIC?
  • From: Shawn K. Quinn
• Alpha CS20 wanted
  • From: Theo de Raadt
• Re: getting dhclient to update bind forwarders IPs
  • From: Raphaël Berbain
• sd0 disk geometry warning
  • From: Per-Olov Sjöholm
• PCI irq routing
  • From: Per-Olov Sjöholm
• ping No buffer space available - Solved (?)
  • From: Jay Truesdale
• Re: ping No buffer space available - Solved (?)
  • From: Brad
• Re: ping No buffer space available - Solved (?)
  • From: L. V. Lammert
• Re: Alpha CS20 wanted
  • From: Matt R
• Re: ping No buffer space available - Solved (?)
  • From: Brad
• BGPD: crash
  • From: Toni Mueller
• Re: BGPD: crash
  • From: Henning Brauer
• Re: BGPD: crash
  • From: Claudio Jeker
• Re: Alpha CS20 wanted
  • From: Patrick Dohman
• NNTP server (inn-2.4.1) on OpenBSD 3.7?
  • From: Kevin
• Multiple SSH daemons
  • From: Dave Harrison
• I seem to have problems when posting to misc@ ?
  • From: Dave Harrison
• Zaurus SL-C3100 now supported
  • From: Niall O'Higgins
• Your Message Could Not Be Delivered
  • From: TELUS.net Postmaster
• Re: UK Keymap issue
  • From: Christian Weisgerber
• Re: UK Keymap issue
  • From: Vladislav Belogrudov
• Re: BGPD: crash
  • From: Toni Mueller
• Re: Some questions related to shell scripts
  • From: Vladislav Belogrudov
• Re: Multiple SSH daemons
  • From: Spruell, Darren-Perot
• Re: BGPD: crash
  • From: Henning Brauer
• Re: Some questions related to shell scripts
  • From: Vladislav Belogrudov
• Re: Alpha CS20 wanted
  • From: Matt R
• Openbsd 3.7's Gnu Assembler (as) file "tagging" behaviour?
  • From: edgar mortiz
• Spamprobe - what happened to the port?
  • From: viq
• Bank of the West Online Banking Account Access Limited (Security Code: PP-090-227-814)
  • From: eTimeBanker Service
• pf questions
  • From: Vivek Ayer
• Please update your PayPal® account information.
  • From: PayPal Updates Team.
• Re: Reboot and halt problem
  • From: Rico
• Reboot and halt problem
  • From: Rico
• Re: Alpha CS20 wanted
  • From: Kevin
• Stripping libraries
  • From: Jonas Melian
• HP DL145 G2, new Opteron/nForce4 based server - mpt(4) problem
  • From: Johan M:son Lindman
• order enquiry !!!!!!!!!!!!!!!!!!!!!
  • From: arsenal williams
• static route files
  • From: Reza Muhammad
• Installing on discless (no removable media) machine from Linux
  • From: Jason Burrell
• www.undeadly.org cannot be found :(
  • From: Vladislav Belogrudov
• Mirroring data over network with failover?
  • From: Dexter Fillmore
• Re: HP DL145 G2, new Opteron/nForce4 based server - mpt(4) problem
  • From: Brad
• Re: Choices for Soekris "disk drives"
  • From: knitti
• Re: Mirroring data over network with failover?
  • From: L. V. Lammert
• Toshiba subnotebook without sound (full dmesg!)
  • From: Gergely KODAJ
• Re: To secure WiFi networks
  • From: Nick Holland
• Load Balance net connections w/ redirect
  • From: James Harless
• Re: Alpha CS20 wanted
  • From: Michael Erdely
• Authpf not adding rules to anchors
  • From: Eric Bullen
• get bittorrent to work via pf
  • From: Vivek Ayer
• Re: get bittorrent to work via pf
  • From: hellsop
• Returned mail: Data format error
  • From: dpodsednik
• Re: Choices for Soekris "disk drives"
  • From: Stuart Henderson
• [no subject]
  • From: Smonek
• Re: get bittorrent to work via pf
  • From: Shawn K. Quinn
• SETI@home for 3.7/sparc64
  • From: Danny Koenig
• Re: get bittorrent to work via pf
  • From: hellsop
• Re: Choices for Soekris "disk drives"
  • From: Pedro la Peu
• Re: Alpha CS20 wanted
  • From: Matthew Clarke
• NOTICE:Managed Protection Account.
  • From: account-update_(_at_)_amazon_(_dot_)_com
• Re: get bittorrent to work via pf
  • From: Jacob Meuser
• IBM mini-pci Atheros wifi card
  • From: Przemysław Nowaczyk
• Re: Alpha CS20 wanted
  • From: Kevin
• Re: get bittorrent to work via pf
  • From: Vivek Ayer
• kdeinit problems in 3.7-current
  • From: Josh Grosse
• OpenBGPD: filter bogus AS...
  • From: Xavier Beaudouin
• VoIP with asterisk and x-lite
  • From: Kiraly Zoltan
• Dell 2800 Server: PERC4ei (Embedded Integrated) RAID solution?
  • From: Anon Y. Mous
• Re: VoIP with asterisk and x-lite
  • From: Pedro la Peu
• LCDPROC
  • From: Steven Bowers
• 'no link' ethernet and dhcp in -current
  • From: Christian Jones
• mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Ulrich Kahl
• strange output from top(1) and ps(1)
  • From: Paul de Weerd
• Re: OpenBGPD: filter bogus AS...
  • From: Claudio Jeker
• VIA VT1211 termperature readout
  • From: Rickard Dahlstrand
• Re: mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Josh Grosse
• A domain question for a private network
  • From: Vivek Ayer
• Compiling for VIA Samuel 2 ("CentaurHauls" 686-class) 533 MHz
  • From: matt lawless
• Re: Compiling for VIA Samuel 2 ("CentaurHauls" 686-class) 533 MHz
  • From: Alexander Bochmann
• Product Lifecycle (end-of-life)
  • From: Phusion
• D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Matthias Kilian
• Ports - Installing in another subdirectory
  • From: Jonas Melian
• Re: D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Matthias Kilian
• Re: A domain question for a private network
  • From: Kevin
• Re: mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Ulrich Kahl
• mouse button emulation and backspace
  • From: Zen Lunatic
• Re: OpenBGPD: filter bogus AS...
  • From: Claudio Jeker
• error setting up wireless net with dhcp
  • From: Al
• ppp.conf 3.7
  • From: J.D. Bronson
• Re: ppp.conf 3.7
  • From: Brad
• Re: ppp.conf 3.7
  • From: Brad
• Re: LCDPROC
  • From: Steven Bowers
• Re: Alpha CS20 wanted
  • From: Kevin
• Re: OpenBGPD: filter bogus AS...
  • From: Rod Dorman
• Re: VIA VT1211 termperature readout
  • From: Rickard Dahlstrand
• Where to get a good seed for srandom()
  • From: Alexander Farber
• Re: mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Michael Hamerski
• Re: Where to get a good seed for srandom()
  • From: Said Outgajjouft
• Re: get bittorrent to work via pf
  • From: Alexander Farber
• Re: Where to get a good seed for srandom()
  • From: Alexander Farber
• Re: pf questions
  • From: Erik Wikström
• 3.7-stable kernel question
  • From: J.D. Bronson
• Re: mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Ulrich Kahl
• Re: mozilla-firefox problem, was: kdeinit problems in 3.7-current
  • From: Ulrich Kahl
• Re: Kernel Panic in 3.7
  • From: Rico
• Re: Kernel Panic in 3.7
  • From: Rico
• Re: Kernel Panic in 3.7
  • From: steve . shockley
• interrupt comparison
  • From: Andreas Bihlmaier
• Re: interrupt comparison
  • From: Karle, Chris
• Re: Where to get a good seed for srandom()
  • From: Jack Bates
• carp and spamd greylisting
  • From: Bryan Irvine
• Shell Scripting Question
  • From: Brandon Mercer
• Re: interrupt comparison
  • From: Andreas Bihlmaier
• Re: Shell Scripting Question
  • From: Jason Opperisano
• Re: Shell Scripting Question
  • From: Brandon Mercer
• Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: edgar mortiz
• 3.7 fdisk Fuji 18GB drive issue
  • From: J.D. Bronson
• Re: Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: Andreas Bihlmaier
• Re: Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: Ray Percival
• Re: Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: edgar mortiz
• Re: Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: edgar mortiz
• Re: Openbsd 3.7 using USB 1gb (fat32-winxp) mount says " Inappropriate file type or format "
  • From: edgar mortiz
• Re: interrupt comparison
  • From: Brad
• Re: raidFRAME - Disk id's changed, raid labels confused?
  • From: jared r r spiegel
• how to reduce ntpd polling cycle in OpenNTPd
  • From: sean conway
• Onboard and USB Sound Trouble
  • From: Robert Jacobs
• Re: Kernel Panic in 3.7
  • From: Rico
• Re: Kernel Panic in 3.7
  • From: Rico
• Re: Kernel Panic in 3.7
  • From: Brad
• Re: LCDPROC
  • From: Steven Bowers
• Writes to samba server very, very slow
  • From: Gary Clemans-Gibbon
• Re: raidFRAME - Disk id's changed, raid labels confused?
  • From: jared r r spiegel
• Re: carp and spamd greylisting
  • From: jared r r spiegel
• Re: bsd.mp, different IPL interrupts = degraded performance?
  • From: jared r r spiegel
• Using crontab to end a process
  • From: Kent Kostuk
• Re: Using crontab to end a process
  • From: Bryan Allen
• Re: Onboard and USB Sound Trouble
  • From: steven mestdagh
• Re: Writes to samba server very, very slow - more info
  • From: Gary Clemans-Gibbon
• Re: Where to get a good seed for srandom()
  • From: Alexander Farber
• Re: how to reduce ntpd polling cycle in OpenNTPd
  • From: Henning Brauer
• Re: Writes to samba server very, very slow
  • From: Tim Hammerquist
• How to change flags of a route?
  • From: Michael Adam
• Increasing network performance
  • From: Rickard Dahlstrand
• Re: Writes to samba server very, very slow
  • From: Tim Hammerquist
• Re: How to change flags of a route?
  • From: Alexander Bochmann
• LaSalleBank NOTICE
  • From: customerservice_(_at_)_lasallebank_(_dot_)_com
• Re: Writes to samba server very, very slow
  • From: Michael Hamerski
• Both carp interfaces are master
  • From: Niclas Sodergard
• Re: Writes to samba server very, very slow
  • From: Henning Brauer
• Re: How to change flags of a route?
  • From: Michael Adam
• Re: Where to get a good seed for srandom()
  • From: Hannah Schroeter
• Re: Writes to samba server very, very slow
  • From: Steve Williams
• Re: Writes to samba server very, very slow
  • From: Nick Holland
• USB2 (EIDE) bad mojo...
  • From: Rene Rivera
• Re: How to change flags of a route?
  • From: Michael Adam
• sniffer
  • From: paolo
• Re: USB2 (EIDE) bad mojo...
  • From: Johan M:son Lindman
• Re: Increasing network performance
  • From: Arnaud Bergeron
• Re: sniffer
  • From: Hannah Schroeter
• Re: Writes to samba server very, very slow
  • From: Alexander Bochmann
• Re: sniffer
  • From: Alexander Bochmann
• Re: sniffer
  • From: tomte
• Re: sniffer
  • From: Brian
• outdated index.txt in ~/3.7/packages/i386/
  • From: alain
• Re: USB2 (EIDE) bad mojo...
  • From: Rene Rivera
• Re: D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Matthias Kilian
• Re: Writes to samba server very, very slow
  • From: Stephen Marley
• Re: Writes to samba server very, very slow
  • From: Karsten McMinn
• YA suexec question...
  • From: Thanos Tsouanas
• Re: Writes to samba server very, very slow
  • From: Daniel Ramaley
• rm: Unknown error: -618868888
  • From: viq
• Re: USB2 (EIDE) bad mojo...
  • From: Rene Rivera
• Re: rm: Unknown error: -618868888
  • From: viq
• Re: Writes to samba server very, very slow
  • From: Stephen Marley
• Re: Writes to samba server very, very slow
  • From: Stuart Henderson
• Re: [Long] Toshiba laptop 3.7 installation problem (Solved)
  • From: Z L
• Re: kdeinit problems in 3.7-current
  • From: Josh Grosse
• Re: YA suexec question...
  • From: knitti
• ipsec bump-in-the-wire transport mode
  • From: Juraj Bednar
• sgi 02 R5K irix 6.3 4.3 unsuccessful installation
  • From: Roger Neth Jr
• Re: Writes to samba server very, very slow
  • From: Avtar Gill
• Re: Writes to samba server very, very slow
  • From: Tim Hammerquist
• Re: Writes to samba server very, very slow
  • From: Brad
• Re: Writes to samba server very, very slow - more info
  • From: Steve Shockley
• Adaptec 6944a or Sun "Happy Meal"
  • From: Steven Bowers
• (g)as on amd64
  • From: Brian
• Re: YA suexec question...
  • From: Thanos Tsouanas
• Slow Response When PPPoE Dies
  • From: Blake Darche
• Re: sgi o2 fails to boot
  • From: Bernd Ahlers
• Re: YA suexec question...
  • From: knitti
• Re: USB2 (EIDE) bad mojo...
  • From: Johan M:son Lindman
• Re: Writes to samba server very, very slow
  • From: Alexander Bochmann
• Re: YA suexec question...
  • From: Thanos Tsouanas
• diskd problem
  • From: Reza Muhammad
• Re: YA suexec question...
  • From: Bryan Allen
• '.' in username
  • From: Thanos Tsouanas
• Re: X11 question during install
  • From: Przemysław Nowaczyk
• Re: D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Peter N. M. Hansteen
• Re: '.' in username
  • From: Alexander Farber
• keyboard.bell.pitch=0 is invalid on Openbsd 3.7 Current
  • From: edgar mortiz
• Re: keyboard.bell.pitch=0 is invalid on Openbsd 3.7 Current
  • From: edgar mortiz
• Re: USB2 (EIDE) bad mojo...
  • From: Rene Rivera
• Re: '.' in username
  • From: Thanos Tsouanas
• Re: '.' in username
  • From: Thanos Tsouanas
• Re: Kernel Panic in 3.7
  • From: Masoud Sharbiani
• keyboard issue kdm
  • From: Qv6
• Re: keyboard issue kdm
  • From: Stephen Marley
• Re: '.' in username
  • From: Bruno Rohee
• Re: keyboard issue kdm
  • From: Qv6
• Re: sniffer
  • From: Clint M. Sand
• Re: '.' in username
  • From: Thanos Tsouanas
• Carp: looking for tool to make failover system.
  • From: Xavier Beaudouin
• Re: D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Matthias Kilian
• Re: D-Link DWL-520 (ath): unknown regulatory domain and kernel freezes
  • From: Reyk Floeter
• Re: Amanda port WO gnuplot?
  • From: C. Bensend
• Re: Where to get a good seed for srandom()
  • From: Jack Bates
• Re: sgi 02 R5K irix 6.3 4.3 unsuccessful installation
  • From: Roger Neth Jr
• Re: sgi 02 R5K irix 6.3 4.3 unsuccessful installation
  • From: Roger Neth Jr
• Re: '.' in username
  • From: Shawn K. Quinn
• Re: IDE / SATA Filesystem Mounting Problem
  • From: George Georgalis
• Still stuck with this assembly stuff (amd64)
  • From: Brian
• Need Quad Ethernet for router box
  • From: Bill Chmura
• Re: Need Quad Ethernet for router box
  • From: Kevin
• Undelivered mail
  • From: owner-LISTSERV
• Re: '.' in username
  • From: Tim Hammerquist
• Re: MySQL socket problem
  • From: viq
• FW: mclpool limit reached Increase kern.maxclusters
  • From: forums
• Re: Need Quad Ethernet for router box
  • From: Henning Brauer
• Re: '.' in username
  • From: Björn Sjöberg
• Re: Need Quad Ethernet for router box
  • From: Brad
• Re: '.' in username
  • From: Ray Lai
• OPENBSD SOCIOLOGICAL SURVEY.
  • From: Michaël Vicente
• Re: '.' in username
  • From: Alexander Bochmann
• Re: '.' in username
  • From: Thanos Tsouanas
• Re: '.' in username
  • From: Shawn K. Quinn
• Re: Writes to samba server very, very slow
  • From: Karsten McMinn
• starting kde on boot
  • From: Qv6
• Re: Need Quad Ethernet for router box
  • From: Bill Chmura
• Re: Need Quad Ethernet for router box
  • From: Henning Brauer
• Re: starting kde on boot
  • From: Stephen Marley
• Re: Need Quad Ethernet for router box
  • From: Alexander Bochmann
• Re: Need Quad Ethernet for router box
  • From: Kevin
• Re: Need Quad Ethernet for router box
  • From: Bill Chmura
• Re: starting kde on boot
  • From: Edd Barrett
• Re: Need Quad Ethernet for router box
  • From: Daniel Polak
• Re: Need Quad Ethernet for router box
  • From: Henning Brauer
• Re: Need Quad Ethernet for router box
  • From: Brad
• Re: Need Quad Ethernet for router box
  • From: Brad
• Re: Adaptec 6944a or Sun "Happy Meal"
  • From: Steven Bowers
• Re: starting kde on boot
  • From: Stephen Marley
• Re: Adaptec 6944a or Sun "Happy Meal"
  • From: Steven Bowers
• The windows world is catching on!
  • From: Sevan / Venture37
• Re: Need Quad Ethernet for router box
  • From: Diana Eichert
• Re: Need Quad Ethernet for router box
  • From: Diana Eichert
• Re: The windows world is catching on!
  • From: Brad
• Re: Need Quad Ethernet for router box
  • From: Brad
• dual boot client to DHCP gets different IP addresses on different OS
  • From: Vivek Ayer
• Re: Need Quad Ethernet for router box
  • From: Diana Eichert
• Re: The windows world is catching on!
  • From: Steve Shockley
• Transparent pf firewall with load balance support
  • From: Vinicius Pavanelli Vianna
• Re: Need Quad Ethernet for router box
  • From: Lars Hansson
• Update Information - Verification Required
  • From: Wells Fargo Banking Online
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Henning Brauer
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Lars Hansson
• Re: '.' in username
  • From: Shawn K. Quinn
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Joe .
• Re: Need Quad Ethernet for router box
  • From: Jon Hart
• Re: Need Quad Ethernet for router box
  • From: Henning Brauer
• mpt driver 3.7 missing tape drive?
  • From: J.D. Bronson
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Nick Holland
• g++: "cannot find atexit, destructors will not be run!"
  • From: Tim Gruene
• Re: ATH AR5212 hangs machine just after boot
  • From: Sevan / Venture37
• ICH7 users?
  • From: Jonathan Gray
• Root partition placement
  • From: Tim
• Re: Root partition placement
  • From: viq
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Spruell, Darren-Perot
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Timothy Donahue
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Spruell, Darren-Perot
• Re: Need Quad Ethernet for router box
  • From: Jon Hart
• pf: allowed sites only via <table>
  • From: Jake Luck
• Re: IDE / SATA Filesystem Mounting Problem
  • From: bofh
• IPSec Routing / Multiple Subnets / GRE Revisited
  • From: Brian A. Seklecki
• 005_libz.patch - fails to change directory
  • From: Uwe Dippel
• Re: 005_libz.patch - fails to change directory
  • From: Brad
• Re: ATH AR5212 hangs machine just after boot
  • From: mattvaldes
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Brad
• Re: lesstif
  • From: D. E. Evans
• Perl DBI and mysql notes
  • From: Karsten McMinn
• X11 Freezes up on OpenBSD-current snapshots
  • From: edgar mortiz
• MIPS64 and PPC 970/970MP future support?
  • From: Anon Y. Mous
• Re: ATH AR5212 hangs machine just after boot
  • From: Sevan / Venture37
• Re: g++: "cannot find atexit, destructors will not be run!"
  • From: Tim Gruene
• Solved Re: starting kde on boot
  • From: Qv6
• Re: Need Quad Ethernet for router box
  • From: Diana Eichert
• Re: MIPS64 and PPC 970/970MP future support?
  • From: Martin Schröder
• ipsec and nat
  • From: Juraj Bednar
• Re: Please help: DHCP over IPSec
  • From: Toni Mueller
• Re: MIPS64 and PPC 970/970MP future support?
  • From: Steve Shockley
• Re: The windows world is catching on!
  • From: Emilio Perea
• Re: Speed isn't everything, luckily for OpenBSD.
  • From: Brian
• Please Upgrade Your Account
  • From: Bank of the West
• Raidframe and Raid Level -6-
  • From: Mathias Mueller
• The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: sebastian . rother
• Telephony software?
  • From: sebastian . rother
• GForge, project management, ERP or similar
  • From: J.C. Roberts
• Saving pf statistics over reboots to facilitate IP accounting.
  • From: Sven Ingebrigt Ulland
• Re: carp0: incorrect hash
  • From: Shawn K. Quinn
• eTimeBanker® Online Update
  • From: Bank of the West eTimeBanker®
• cvs diff -N
  • From: Dimitri Sokolyuk
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: sebastian . rother
• Re: PR 4124 can not use Brother HL140 printer via USB port
  • From: Hermann Gottschalk
• missing: ./etc/acpi
  • From: b h
• OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Miles Keaton
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: Steve Shockley
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Ray Percival
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Miles Keaton
• Fwd: missing: ./etc/acpi
  • From: b h
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Steve Shockley
• Re: IDE / SATA Filesystem Mounting Problem
  • From: George Georgalis
• Re: IDE / SATA Filesystem Mounting Problem
  • From: bofh
• carp failover on DSL and Cable connection?
  • From: Jonathan Walther
• Re: IDE / SATA Filesystem Mounting Problem
  • From: George Georgalis
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: sebastian . rother
• 3.7 install hangs with 3ware 8006-2LP
  • From: Willi Schiegel
• Get desired NWID
  • From: Marc Winiger
• Conexant "Amigo " usb ADSL modem .
  • From: RGKärcher
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Lars Hansson
• Re: Disable IPv6 on 3.7
  • From: Lukas Ratajski
• Re: Disable IPv6 on 3.7
  • From: Lars Hansson
• Re: carp failover on DSL and Cable connection?
  • From: Stephen Marley
• Re: Disable IPv6 on 3.7
  • From: Shawn K. Quinn
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: Luis Bruno
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: Erik Wikström
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: Erik Wikström
• Re: The MD5-File at the Server... (Request for RMD160 and SHA1 Checksums)
  • From: sebastian . rother
• Re: 005_libz.patch - fails to change directory
  • From: Clint M. Sand
• Re: 005_libz.patch - fails to change directory
  • From: Brad
• Create my own shell?
  • From: Abel Talaverón Estevez
• pfsync problem
  • From: luis
• Re: Create my own shell?
  • From: Ivo Dijkhuis
• bgpd and community attribute setting
  • From: G Douglas Davidson
• Re: 3.7 install hangs with 3ware 8006-2LP
  • From: L. V. Lammert
• HP DL145 G2?
  • From: Mike Shaw
• Re: Create my own shell?
  • From: Qv6
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Miles Keaton
• Re: OT: any problems with webservers on high ports blocked by cor porate-firewalls?
  • From: Spruell, Darren-Perot
• Re: IDE / SATA Filesystem Mounting Problem
  • From: George Georgalis
• eTimeBanker® Online Banking Account Access Limited (Security Code: PP-090-227-824)
  • From: customer_(_dot_)_service_(_at_)_bankofthewest_(_dot_)_com
• Re: Disable IPv6 on 3.7
  • From: Russell J. Wood
• Re: Disable IPv6 on 3.7
  • From: Brad
• Re: Disable IPv6 on 3.7
  • From: Russell J. Wood
• Re: Disable IPv6 on 3.7
  • From: Russell J. Wood
• Re: Disable IPv6 on 3.7
  • From: knitti
• Re: Disable IPv6 on 3.7
  • From: Sean Brown
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Lars Hansson
• Re: Disable IPv6 on 3.7
  • From: Lars Hansson
• Re: carp failover on DSL and Cable connection?
  • From: Jonathan Walther
• Did anybody hear this??
  • From: Siju George
• Re: OT: any problems with webservers on high ports blocked by corporate-firewalls?
  • From: Miles Keaton
• Re: Did anybody hear this??
  • From: Matthew Weigel
• Re: HP DL145 G2?
  • From: Johan M:son Lindman
• Re: carp failover on DSL and Cable connection?
  • From: Stephen Marley
• Re: MySQL socket problem (solved)
  • From: Uwe Dippel
• Re: Disable IPv6 on 3.7
  • From: Russell J. Wood
• Re: MySQL socket problem (solved)
  • From: Edd Barrett
• Re: Disable IPv6 on 3.7
  • From: Adam Papai
• Re: Disable IPv6 on 3.7
  • From: Henning Brauer
• spamd greylisting, masking on /24
  • From: Stuart Henderson
• Re: Did anybody hear this??
  • From: Jurjen Oskam
• Updating packages.
  • From: Kevin MacPherson
• RETURNED MAIL: SEE TRANSCRIPT FOR DETAILS
  • From: offers
• Re: Updating packages.
  • From: Edd Barrett
• Re: Did anybody hear this??
  • From: Terry Tyson
• Re: Did anybody hear this??
  • From: Spruell, Darren-Perot
• Re: Did anybody hear this??
  • From: Jurjen Oskam
• Anyone know of a mavell based dual gigE copper card
  • From: Bill Chmura
• chrooted httpd and <directory>
  • From: Vlad Ciubotariu
• Re: Anyone know of a mavell based dual gigE copper card
  • From: Henning Brauer
• Other Sharp Zauri?
  • From: STeve Andre'
• isakmpd stops forwarding data over enc0
  • From: Sean Knox
• Re: Updating packages
  • From: Dimitri Yioulos
• Bridge Interface stop ICMP redirects?
  • From: Steve Williams
• Re: isakmpd stops forwarding data over enc0
  • From: Sean Knox
• Re: Bridge Interface stop ICMP redirects?
  • From: Spruell, Darren-Perot
• Re: MySQL socket problem (solved)
  • From: Jonathan Schleifer
• rdr question
  • From: GV
• Re: Anyone know of a mavell based dual gigE copper card
  • From: Brad
• Problem with NFS, everything freeze
  • From: Adam Papai
• Re: Problem with NFS, everything freeze
  • From: Steven Manos
• Re: Problem with NFS, everything freeze
  • From: Adam Papai
• make /dev/pf world readable?
  • From: Jan Sepp
• Re: make /dev/pf world readable?
  • From: Alexander Farber
• Re: make /dev/pf world readable?
  • From: Lars Hansson
• Re: make /dev/pf world readable?
  • From: Alexander Farber
• Re: Create my own shell? SOLVED
  • From: Abel Talaverón Estevez
• Re: Problem with NFS, everything freeze
  • From: Steven Manos
• Re: Problem with NFS, everything freeze
  • From: Adam Papai
• Re: Create my own shell? SOLVED
  • From: Alexander Farber
• Re: openbsd & rpc/xdr
  • From: Edd Barrett
• Re: Create my own shell? SOLVED
  • From: Alexander Farber
• Let me Introduce Myself to your Church or Ministry
  • From: NetBob4Churches
• Re: Create my own shell? SOLVED
  • From: Abel Talaverón Estevez
• Re: Create my own shell? SOLVED
  • From: Abel Talaverón Estevez
• Re: missing: ./etc/acpi (missing instructions in "following-current" on i386)
  • From: b h
• Re: Create my own shell? SOLVED
  • From: Alexander Farber
• Re: Recommendet (P)ATA-Controller for Raidframe
  • From: Edd Barrett
• Re: missing: ./etc/acpi (missing instructions in "following-current" on i386)
  • From: Ulrich Kahl
• Unsubscription Confirmation
  • From: Subscriber Services
• restore: Tape block size problem?
  • From: Daniel Hamlin
• Re: openbsd & rpc/xdr
  • From: Stephen Marley
• Re: openbsd & rpc/xdr
  • From: Gustavo Rios
• IMAP ssl problems
  • From: stupidmail4me
• memory allocation for large datasets
  • From: jon butchar
• problems adding packages in 3.7
  • From: Russell Fulton
• Re: problems adding packages in 3.7 -- solved
  • From: Russell Fulton
• Re: problems adding packages in 3.7
  • From: Matthias Kilian
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Brad
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Spruell, Darren-Perot
• Re: problems adding packages in 3.7
  • From: Joe Barnett
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Brad
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Steve Shockley
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Spruell, Darren-Perot
• Re: 1U server recommendation
  • From: Steve Shockley
• Re: 1U server recommendation
  • From: Kevin
• Re: suggested /etc/skel/ modifications
  • From: Jonathan Schleifer
• Re: 1U server recommendation
  • From: Brandon Mercer
• About horde port
  • From: FBN
• hifn crypto acc.
  • From: Fredrik Widlund
• Dell PowerEdge 750 SATA
  • From: Matteo Mancini
• Re: Linksys EG1032 not SysKonnect anymore as of rev. 3
  • From: Johan P. Lindström
• Re: Dell PowerEdge 750 SATA
  • From: Matteo Mancini
• amdpm in GENERIC
  • From: Stephan Tesch
• Re: OpenBSD 3.7 on VM Workstation 5
  • From: Greg Thomas
• Fwd: OpenBSD 3.7 on Soekris (w/ httpd)
  • From: Marti Martinez
• Re: suggested /etc/skel/ modifications
  • From: Hannah Schroeter
• segfaults in OpenBSD 3.7
  • From: Sharad Birmiwal
• Re: segfaults in OpenBSD 3.7
  • From: Hannah Schroeter
• Re: 1U server recommendation
  • From: Kevin
• Re: segfaults in OpenBSD 3.7
  • From: Sharad Birmiwal
• Re: segfaults in OpenBSD 3.7
  • From: Sharad Birmiwal
• Re: 1U server recommendation
  • From: Brandon Mercer
• Re: suggested /etc/skel/ modifications
  • From: Jonathan Schleifer
• OpenBSD vs FreeBSD (network performance)
  • From: Marcelo de Souza
• Re: 1U server recommendation
  • From: Shawn K. Quinn
• Re: suggested /etc/skel/ modifications
  • From: Dave Feustel
• Re: amdpm in GENERIC
  • From: Stephan Tesch
• Re: OpenBSD vs FreeBSD (network performance)
  • From: Claudio Jeker
• Re: tcpdump | more doesn't produce output
  • From: Sven Ingebrigt Ulland
• Re: 1U server recommendation
  • From: Martin Schröder
• 1U opteron servers from tier-1 vendors?
  • From: bofh
• Re: 1U server recommendation
  • From: Richard Welty
• =??B?RERPUyBBdHRhY2shISF3aG8gY2FuIGhlbHAgbWU/?=
  • From: =??B?amtpbmcx?=
• Re: DDOS Attack!!!who can help me?
  • From: jeff
• =??B?RERPUyBBdHRhY2shISF3aG8gY2FuIGhlbHAgbWU/?=
  • From: =??B?amtpbmcx?=
• Re: DDOS Attack!!!who can help me?
  • From: Han Boetes
• =??B?UkU6RERPUyBBdHRhY2shISF3aG8gY2FuIGhlbHAgbWU/?=
  • From: =??B?amtpbmcx?=
• Re: Bandwidth Limiting on OBSD 3.7 - altq?
  • From: Sven Ingebrigt Ulland
• Re: amdpm in GENERIC
  • From: Stephan Tesch
• freeze at ifconfig
  • From: Uwe Dippel
• Re: Recommendet (P)ATA-Controller for Raidframe
  • From: Edd Barrett
• Re: freeze at ifconfig
  • From: Andreas Bihlmaier
• iwi(4), possible to use 802.1x authentication?
  • From: b h
• clock skew when running nessus, 3.7 i386
  • From: Ryan Fox
• cleaned mbr
  • From: Isak Lyberth
• Re: cleaned mbr
  • From: Matthias Kilian
• Re: cleaned mbr
  • From: Matthias Kilian
• We Get You The Business You Deserve!
  • From: internetpalace
• firefox crashes when printing using cups
  • From: Chris Paul
• Marvell Yukon 88E8050 PCIe GigEthernet
  • From: Carlos A. Carnero Delgado
• Re: firefox crashes when printing using cups
  • From: Han Boetes
• Re: cleaned mbr
  • From: Isak Lyberth
• Re: firefox crashes when printing using cups
  • From: Chris Paul
• Re: Is there a problem with multiple catp interfaces on one net?
  • From: stan
• Awesome installation on Panasonic Toughbook CF-71
  • From: Roger Neth Jr
• Re: Awesome installation on Panasonic Toughbook CF-71
  • From: Bernd Schoeller
• Re: 1U server recommendation
  • From: Martin Schröder
• Re: 1U server recommendation
  • From: Martin Schröder
• Re: freeze at ifconfig
  • From: Uwe Dippel
• Re: freeze on the fly
  • From: Shawn K. Quinn
• Re: hifn crypto acc.
  • From: Jason Crawford
• VIA IPSec acceleration
  • From: Mike
• Network interface (bge) always down after reboot
  • From: Tom Mack
• pkg_add -r question?
  • From: L. V. Lammert
• Re: pkg_add -r question?
  • From: Clint M. Sand
• find-build-order usage help
  • From: viq
• Re: altq help on 3.7
  • From: Erik Wikström
• newbie question on patches
  • From: Roger Neth Jr
• Re: newbie question on patches
  • From: viq
• clustering SMP machines: MPICH2 build error
  • From: dick
• WhatTheHack, Netherlands, join us on Sunday (EUR 50)
  • From: Michael Knudsen