[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: D-Link DWL-G520 not configured



I think you have to read manpage before trying ifconfig.
There are more conf. options for WLAN than just an IP address.

man 4 ath

On Friday 13 May 2005 09:44, PP;P5P:QP5P9 P!P0P4QP8P:P>P2 wrote:
> Hi All!
> I just install snapshot OpenBSD 3.7 and see that my D-Link DWL-G520 wireless
> card detected by kernel:
> /*dmesg output*/
> # dmesg
> OpenBSD 3.7-current (GENERIC) #110: Mon May  2 20:07:58 MDT 2005
>     deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 468 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem  = 268001280 (261720K)
> avail mem = 237731840 (232160K)
> using 3297 buffers containing 13504512 bytes (13188K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(54) BIOS, date 03/15/00, BIOS32 rev. 0 @ 0xf06c0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xf22
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0e80/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307015>
> wd0: 16-sector PIO, LBA, 14649MB, 30003120 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> wdc_atapi_intr: warning: reading only 0 of 36 bytes
> sd0 at scsibus0 targ 0 lun 0: <, , > SCSI0 0/direct fixed
> sd0: drive offline
> sd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 4 function 3 not configured
> rl0 at pci0 dev 11 function 0 "D-Link Systems 530TX+" rev 0x10: irq 10 address
> 00:05:5d:49:d9:7d
> rlphy0 at rl0 phy 0: RTL internal phy
> ath0 at pci0 dev 14 function 0 "Atheros AR5212" rev 0x01: irq 5
> ath0: mac 112.9 phy 4.5 radio 5.6 5.6, 802.11a/b/gath0: no valid channels for
> regdomain NONE(32976)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask eb65 netmask ef65 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> dkcsum: read of sd0 failed (0)
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> /*end*/
> , but if I give a command
> #ifconfig ath0 192.168.1.1 255.255.255.0
> system responded
> ifconfig: SIOCGIFFLAGS: Device not configured
> #
> what shall I do?
> Help please.
> Alexey
> 
> 

-- 
Best regards
Maxim Bourmistrov