[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OpenBSD/SGI snapshot fails to boot from harddisk



# disklabel sd0
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 10.0MHz, offset = 0x8
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: 4.26GB A 80-LXY4
flags:
bytes/sector: 512
sectors/track: 141
tracks/cylinder: 10
sectors/cylinder: 1410
cylinders: 5899
total sectors: 8330543
rpm: 7200
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0

16 partitions:
#             size        offset  fstype [fsize bsize  cpg]
  a:       7304063       1026480  4.2BSD   2048 16384  480 # Cyl   728 -  5908*
  b:       1023345          3135    swap                   # Cyl     2*-   727
  c:       8330543             0  unused      0     0      # Cyl     0 -  5908*
  p:          3135             0 unknown                   # Cyl     0 -     2*
#

# mount /dev/sd0a /mnt
# ls /mnt
.cshrc   altroot  bsd      dev      home     root     stand    tmp      var
.profile bin      bsd.rd   etc      mnt      sbin     sys      usr
#


On Fri, 11 Feb 2005 23:58:38 +0100 (CET), Tamas TEVESZ <ice_(_at_)_extreme_(_dot_)_hu> wrote:
> On Fri, 11 Feb 2005, david l goodrich wrote:
>
>  > arg 5: OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0)
>  > arg 6: OSLoadFilename=/bsd
>  > Boot: pci(0)scsi(0)disk(2)rdisk(0)partition(0)/bsd
>  > can't open file pci(0)scsi(0)disk(2)rdisk(0)partition(0)/bsd
>
> disklabel? (from the netbooted bsd.rd)
>
> --
> [-]
>
> mkdir /nonexistent