[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: kernel: page fault trap, code = 0



Hey all!

Alright, now I've gotten the dmesg, as well as written
down the ps and trace. Here it is:

[ dmesg ]--------------------------------------------

OpenBSD 3.6-current (RAMDISK) #542: Sun Feb  6 14:27:42 MST 2005
     pvalchev_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
real mem  = 1073209344 (1048056K)
avail mem = 975433728 (952572K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e6) BIOS, date 06/16/04, BIOS32 rev. 0 @ 0xeb560
pcibios0 at bios0: rev 2.2 @ 0xeb560/0x4aa0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9600/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2640
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x1000 0xce000/0x2000 0xe9c00/0x6400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915G/P/GV Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 915G/P/GV PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x3e50 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vendor "ATI", unknown product 0x3e70 (class display subclass 
miscellaneous, rev 0x00) at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
"Broadcom BCM5751" rev 0x01 at pci3 dev 0 function 0 not configured
"Intel 82801FB USB" rev 0x03 at pci0 dev 29 function 0 not configured
"Intel 82801FB USB" rev 0x03 at pci0 dev 29 function 1 not configured
"Intel 82801FB USB" rev 0x03 at pci0 dev 29 function 2 not configured
"Intel 82801FB USB" rev 0x03 at pci0 dev 29 function 3 not configured
"Intel 82801FB USB" rev 0x03 at pci0 dev 29 function 7 not configured
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci4 at ppb3 bus 4
"Creative Labs SoundBlaster Audigy LS" rev 0x00 at pci4 dev 4 
function 0 not configured
vendor "Creative Labs", unknown product 0x7005 (class input 
subclass miscellaneous, rev 0x00) at pci4 dev 4 function 1 not 
configured
vendor "AT&T/Lucent", unknown product 0x048c (class communications 
subclass miscellaneous, rev 0x03) at pci4 dev 9 function 0 not 
configured
"AT&T/Lucent FW322 1394" rev 0x61 at pci4 dev 11 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: 
DMA, channel 0 configured to compatibility, channel 1 configured to 
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0B15> 
SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HP, DVD Writer 630c, AH26> SCSI0 
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: 
DMA, channel 0 configured to native-PCI, channel 1 configured to 
native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160023AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, 
using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
wd0: no disk label
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

[ ps ]-----------------------------------------------

PID     PPID     PGRP     UID  S     FLAGS     WAIT     COMMAND
  0       -1        0       0  7   0x80204              swapper

[ trace ] -------------------------------------------

usb_schedsoftintr(d1790000,d1790058,0,d06f1c40,d1773280) at 
usb_schedsofintr+0x10
uhci_intr1(d1790000,0,0d06f1ca0,0) at uhci_intr1+0x13e
uhci_intr(d1790000) at uhci_intr+0x24
Xrecurse_legacy5(c) at Xrecurse_legacy50x86
-- interrupt --
Xspllower(0,d06f1c90,d01ef3bd,d059b924,40) at Xspllower+0xe
mtx_leave(d059b924,40,d06f1c90,d0ef3aa,d1790000) at mtx_leave+0x19
printf(d0558da8,d05ce680,4,d06f1cb0,d0595ab4) at printf+0x61
uhci_pci_attach(d1773f40,d1790000,d06f1da8,d01ef397,d0332708,d06f1da8,d1773f40,d0594140,d06f1da8,d1790014,d05a74e4,d06f1d50,d01ea80b,d1773f40,d0594140,d06f1da8,d0332708,265b8086,8000eb00,d06f1f00,d0332637,d06f1f00,8000eb00,d06f1de0, d03326c3,d1773f40,d06f1da8,d0332708, d03327d0,d0595ab4, d1773f40, d05a4c60, d06f1d80, d010219d,0,1e,c030003,8,3,20,1d,0,1,0,d06f1ea0,0,1,d05a8da0,d06f1f00,3,1d,0,3,8000eb00,265b8086,c030003,0,8000eb00) at 
uhci_pci_attach+0x169
config_attach(d1773fc0,d05936b4,d06f1ea0,d03324c,d06f1ea0) at 
config_attach+0x146
config_found_sm(d1773fc0,d06f1ea,d033242c,0) at config_found_sm+0x2f
mainbus_attach(d1773fc0,0,8,0,d04d7300,d05d6508,d030d1f1,0,0,d0593690,0,d1773fd4,d05a4dc,d06f1f30,d01ea872,0,d0593690,0,0,9,d05d6380,60,d04970c,9,d05d6380,d06f1f50,d040a1df,d04d7300,0,d06f1f50,d030a1d0,9,d05d6380,d06f1f09,d06f1f90,2,294007ff,d05f,0,0,d01004bf,0,0,0,0,0) at 
mainbus_attach+0xc9
config_attach(d,0593690,0,0,9) at config_attach+0x146
config_rootfound(d04d7300,0,d06f1f50,d030a1d0) at config_rootfound+0x3e
cpu_configure(0,1,3,0,d06ef010,6ef000,ef6000,0,0,0,0,10,d06f1f98,d06f1f90,2,294007ff,d05f,0,0,d01004bf,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0) at 
cpu_configure+0x1f
main(0,0,0,0,0) at main+0x2ed

Can anybody know my problem just by looking at that? :)

Thanks again,
fafa

----- Original Message -----
From: "Fred Crowson" <openbsd_(_at_)_crowsons_(_dot_)_net>
To: misc_(_at_)_openbsd_(_dot_)_org
Subject: Re: kernel: page fault trap, code = 0
Date: Thu, 10 Feb 2005 21:33:13 +0000

>
> Fafa Diliha Romanova wrote:
> > Thank you all for your fast (and funny) replies!
> >
> > Ok, I didn't notice that ddb> was a prompt,
> > I tried booting from my USB keyboard and mouse.
> >
> > (Does OpenBSD have any problems with USB?)
> >
> > Anyhow, I do not know how to mount a floppy
> > and cat 'ps', 'trace' and 'dmesg' into it, using
> > that prompt. I don't have any special equipment
> > like terminals to do the job.
> >
> > I tried disabling USB from the BIOS, and again
> > OpenBSD froze saying:
> >
> > pctr: user-level cycle counter enabled
> >
> > But that is irrelevant I guess, since USB is
> > a necessity in my case.
> >
> > Thanks,
> > fafa
> >
> http://www.openbsd.org/faq/faq4.html#getdmesg
>
> might of been some use as would reading the faq in general - it is excellent.
>
> My experience of HP Compaq machines is that the bios does things 
> the HP way - changing the bios settings can make a difference 
> between a install  failure and a stable OpenBSD machine.
>
> HTH
>
> Fred
> ;~)

-- 
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm