OpenBSD/SGI snapshot fails to boot from harddisk

[david l goodrich <dlg_(_at_)_dorkzilla_(_dot_)_org>]

I've successfully installed a snapshot onto my SGI O2

 > hinv
                    System: IP32
                 Processor: 174 Mhz R10000, with FPU
      Primary I-cache size: 32 Kbytes
      Primary D-cache size: 32 Kbytes
      Secondary cache size: 1024 Kbytes
               Memory size: 64 Mbytes
                  Graphics: CRM, Rev C
                     Audio: A3 version 1
                 SCSI Disk: scsi(0)disk(2)
                SCSI CDROM: scsi(0)cdrom(4)

but when i reboot, set the OSLoader to "boot" like it says in the
install instructions, and type "boot" i get

 > boot
17488+160 entry: 0x80010120

OpenBSD/sgi Arcbios boot
arg 0: pci(0)scsi(0)disk(2)rdisk(0)partition(8)/boot
arg 1: ConsoleIn=serial(0)
arg 2: ConsoleOut=serial(0)
arg 3: SystemPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(8)
arg 4: OSLoader=boot
arg 5: OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0)
arg 6: OSLoadFilename=/bsd
Boot: pci(0)scsi(0)disk(2)rdisk(0)partition(0)/bsd
can't open file pci(0)scsi(0)disk(2)rdisk(0)partition(0)/bsd
Boot FAILED!



then it reboots.  my printenv looks like this:
 > printenv
AutoLoad=Yes
diskless=0
dbaud=9600
volume=80
sgilogo=y
monitor=h
crt_option=1
SystemPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(8)
OSLoadPartition=pci(0)scsi(0)disk(2)rdisk(0)partition(0)
OSLoader=boot
OSLoadFilename=/bsd
console=s
netaddr=172.20.4.14
TimeZone=cst6cdt
cpufreq=174
eaddr=08:00:69:0c:2b:78
NoAutoLoad=CONSOLE OPEN FAILED.
ConsoleOut=serial(0)
ConsoleIn=serial(0)
videostatus=illegal_env_var
 >


i can provide a dmesg from the netboot kernel if required.  Thanks for
the help.
   --david

[demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]