[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Help! Drive order changes!



dmesg from the system with the harddrives that are on the pci card unplugged:

root_(_at_)_merlot_(_dot_)_beastproject_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAIDF
cpu0: AMD Athlon(tm) XP 2200+ ("AuthenticAMD" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, MMX,FXSR,SSE
real mem = 536354816 (523784K)
avail mem = 481927168 (470632K)
using 4278 buffers containing 26918912 bytes (26288K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fb) BIOS, date 07/19/04, BIOS32 rev. 0 @ 0xfb450
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf74
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x8000! 0xd8000/0x1800 0xda000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 8 function 0 "CMD Technology PCI0680" rev 0x02
pciide0: bus-master DMA support present
pciide0: channel 0 configured to native-PCI mode
pciide0: using irq 11 for native-PCI interrupt
pciide0: channel 1 configured to native-PCI mode
fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x08: irq 5, address 00:d0:b7:d4:83:27
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci0 dev 11 function 0 "Intel 82557" rev 0x08: irq 10, address 00:d0:b7:85:a7:3d
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci0 dev 12 function 0 not configured
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB 2.0" rev 0x82: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <WDC WD102AA>
wd0: 16-sector PIO, LBA, 9787MB, 20044080 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1 at pciide1 channel 1 drive 0: <WDC WD200BB-75CLB0>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
atapiscsi0 at pciide1 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, DVD-ROM LTD163, GH4W> SCSI0 5/cdrom removable
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 5
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address 00:0d:87:6d:ad:73
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 8
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
wd1: no disk label
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302



as you can see the kernel id's the (pci card) pciide0 at pci0 dev 8 function 0 "CMD Technology PCI0680" rev 0x02 as the 1st ide device, and the (onboard) pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility as the second.


i have looked at the UKC man page but have had no luck. is there away i can change this with a custom kernel?