Re: pcmcia not working

[Emilio Perea <eperea_(_at_)_walkereng_(_dot_)_com>]

On Thu, Oct 28, 2004 at 06:34:09PM +0200, dg_(_at_)_mitc_(_dot_)_net wrote:
> Hi,
> 
> I ditched Windows XP from my Toshiba laptop and everything works fine
> except for the pcmcia (and the fans are loud, but that's an easy fix >:) )
> 
> cbb0 at pci1 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01pci_intr_map: no mapping for pin A
> 
> ...which may be the reason that wi0 isn't configured (a prism pcmcia wifi card)
> which works fine in a soekris.
>  
> Any ideas what this could be? Googling showed dmesg's with the same device
> booting without problems.

I think that Toshiba has a tradition of slightly incompatible card
controllers due to working with NEC while the standards are being
written and then finding that Intel's version is adopted.  Not all
cardbus devices will work on my Portégé 3110CT.  However, in the System
Setup page 2/2 there is a PC CARD Controller Mode setting which helps
sometimes.  You might try that, though it's obviously a different model.

My dmesg says:

cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC95B CardBus" rev 0x07: irq 11

Emilio