[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Freezes on 3.5
- To: misc_(_at_)_openbsd_(_dot_)_org
- Subject: Re: Freezes on 3.5
- From: Dirk Rösler <lists2004_(_at_)_unicircuits_(_dot_)_com>
- Date: Thu, 16 Sep 2004 12:28:50 +0900
- Cc: Ted Unangst <tedu_(_at_)_zeitbombe_(_dot_)_org>
Hello again,
I'm afraid to report that the freeze has happened again today, after
just over a week of uptime, symptoms as before (system just sits there,
cursor flashing but shell not responding, pings OK but network services
not working (http, ssh, imaps)).
The update to current has not resolved this or the USB issue.
Anything else I can try? If any further information is required, please
let me know.
Thanks & regards
Dirk
pec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6880/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04: rng active,
7Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture
at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 2 function
0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address
00:10:dc:28:e7:4a
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd1 at pciide0 channel 0 drive 1: <ST320413A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x11: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x11: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x11: irq 11,
ICH2 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e765 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
rebooting...
OpenBSD 3.6 (GENERIC) #0: Mon Sep 6 16:28:13 JST 2004
dirk_(_at_)_www_(_dot_)_unicircuits_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(TM) CPU 1100MHz ("GenuineIntel" 686-class) 1.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 266838016 (260584K)
avail mem = 236597248 (231052K)
using 3282 buffers containing 13443072 bytes (13128K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/03/02, BIOS32 rev. 0 @
0xfdb00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6880/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04: rng active,
7Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture
at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 2 function
0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address
00:10:dc:28:e7:4a
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd1 at pciide0 channel 0 drive 1: <ST320413A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x11: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x11: irq 10
uvm_fault(0xd05d6200, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at usb_schedsoftintr+0x10: movl 0x4(%edx),%eax
ddb> rebooting...
OpenBSD 3.6 (GENERIC) #0: Mon Sep 6 16:28:13 JST 2004
dirk_(_at_)_www_(_dot_)_unicircuits_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(TM) CPU 1100MHz ("GenuineIntel" 686-class) 1.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 266838016 (260584K)
avail mem = 236597248 (231052K)
using 3282 buffers containing 13443072 bytes (13128K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/03/02, BIOS32 rev. 0 @
0xfdb00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6880/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04: rng active,
7Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture
at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 2 function
0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address
00:10:dc:28:e7:4a
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd1 at pciide0 channel 0 drive 1: <ST320413A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x11: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x11: irq 10
uvm_fault(0xd05d6200, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at usb_schedsoftintr+0x10: movl 0x4(%edx),%eax
ddb> rebooting...
OpenBSD 3.6 (GENERIC) #0: Mon Sep 6 16:28:13 JST 2004
dirk_(_at_)_www_(_dot_)_unicircuits_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(TM) CPU 1100MHz ("GenuineIntel" 686-class) 1.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 266838016 (260584K)
avail mem = 236597248 (231052K)
using 3282 buffers containing 13443072 bytes (13128K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/03/02, BIOS32 rev. 0 @
0xfdb00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6880/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04: rng active,
7Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture
at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 2 function
0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address
00:10:dc:28:e7:4a
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd1 at pciide0 channel 0 drive 1: <ST320413A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x11: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x11: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x11: irq 11,
ICH2 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e765 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
OpenBSD 3.6 (GENERIC) #0: Mon Sep 6 16:28:13 JST 2004
dirk_(_at_)_www_(_dot_)_unicircuits_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(TM) CPU 1100MHz ("GenuineIntel" 686-class) 1.10
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 266838016 (260584K)
avail mem = 236597248 (231052K)
using 3282 buffers containing 13443072 bytes (13128K) of memory
User Kernel Config
UKC> disable usb
257 usb* disabled
UKC> disable uhub
258 uhub* disabled
259 uhub* disabled
UKC> disable uhci
113 uhci* disabled
UKC> exit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/03/02, BIOS32 rev. 0 @
0xfdb00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6880/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04: rng active,
8Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x04: aperture
at 0xe8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x11
pci1 at ppb0 bus 1
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci1 dev 2 function
0 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03: irq 11, address
00:10:dc:28:e7:4a
inphy0 at fxp0 phy 1: i82562EM 10/100 media interface, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x11
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x11: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3102AT>
wd0: 16-sector PIO, LBA, 9773MB, 20015856 sectors
wd1 at pciide0 channel 0 drive 1: <ST320413A>
wd1: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1612, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801BA USB" rev 0x11 at pci0 dev 31 function 2 not configured
"Intel 82801BA SMBus" rev 0x11 at pci0 dev 31 function 3 not configured
"Intel 82801BA USB2" rev 0x11 at pci0 dev 31 function 4 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x11: irq 11,
ICH2 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e765 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Visit your host, monkey.org