[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 3.6 snapshot from 08/27/04 hangs after boot



On Wed, 1 Sep 2004 14:28:11 +0200
Sascha Hanse <sensei_(_at_)_bsdberlin_(_dot_)_org> wrote:

> Hi,
> 
> I wanted to upgrade my 3.5 Box to 3.6, so I used the cd36.iso to make
> a bootable disc. I booted with the CD and then the bootprogress
> stopped here:
> 
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> 
> The bootprogress just stops without any errors. After some tries, it
> works but some seconds later the whole process ends with an uvm fault.
> I couldn't yet write down the fault because the machine reboots
> immediately. DMESG is attached.
> 
> 
> 

Sry, here the dmesg:


-----
OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) Processor ("AuthenticAMD" 686-class) 1.30 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR,SSE
real mem  = 234401792 (228908K)
avail mem = 210989056 (206044K)
using 2886 buffers containing 11821056 bytes (11544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/30/03, BIOS32 rev. 0 @
0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf78e0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 740 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at
0xc0000000, size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 740: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J340>
wd0: 16-sector PIO, LBA48, 39266MB, 80418240 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 4D040H2>
wd1: 16-sector PIO, LBA, 39083MB, 80043264 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <IDE, DVD-ROM 16X, 7.50> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
ohci1: SMM does not respond, resetting
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"SIS 7002 USB" rev 0x00 at pci0 dev 3 function 3 not configured
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90:  irq 11,
address 00:0d:87:5a:60:d0
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 8
cmpci0 at pci0 dev 9 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x10: irq 5
audio0 at cmpci0
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5 address
00:50:bf:e0:c5:40
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c060 netmask c860 ttymask d8e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <IC, USB Storage-CFC, 301b> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <IC, USB Storage-SMC, 301b> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <IC, USB Storage-MMC, 301b> SCSI0 0/direct
removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <IC, USB Storage-MSC, 301b> SCSI0 0/direct
removable
sd3: drive offline



Visit your host, monkey.org