[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Problems with SBUS Quad-Ethernetcard in Ultra 2



Dear misc mailinglistusers

After installing a quad-ethernet sbus card in a ultra2 the following error
occurs. The box is installed with OBSD 3.5 from the offical CDROM.

Googling shows one or two other guys with troubles but no answers or
followups in their threads and the msgs are old (around OBSD 3.1).

Since I have no clue what exaclty went wrong here the dmesg containing the
error.

dmesg:
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

OpenBSD 3.5 (GENERIC) #123: Mon Mar 29 16:12:59 MST 2004
    deraadt_(_at_)_sparc64_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 134217728
avail memory = 115089408
using 819 buffers containing 6709248 bytes of memory
bootpath: /sbus_(_at_)_1f,0/SUNW,fas_(_at_)_e,8800000/sd_(_at_)_1,0
mainbus0 (root): Sun Ultra 2 UPA/SBus (UltraSPARC-II 296MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 295.993 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external
(64 b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
STC0 on /mainbus enabled
DVMA map: ff800000 to ffffe000
IOTDB: 7cc000 to 7ce000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 class block slot 15 offset 0x1400000 vector 29 ipl 11
not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 809bf4f1
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0: layout 44
wskbd0 at zskbd0: console keyboard
zstty2 at zs1 channel 1, mouse
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-mp (0/3) ports 4
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: dma rev fas
esp0: FAS366/HME, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 1 lun 0: <IBM, DDRS34560SUN4.2G, S98E> SCSI2 0/direct
fixed
sd0: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec total
sd1 at scsibus0 targ 2 lun 0: <SEAGATE, ST34572W, 0718> SCSI2 0/direct fixed
sd1: drive offline
cd0 at scsibus0 targ 6 lun 0: <NEC, CD-ROM DRIVE:462, 1.14> SCSI2 5/cdrom
removable
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address
08:00:20:9b:f4:f1
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
SUNW,bpp at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2 not configured
qec0 at sbus0 slot 1 offset 0x20000 vector 4 ipl 2: 128K memory
qe0 at qec0 slot 0 offset 0x0 rev 1iomap insert error: 12 for va 0x8898000
pa 0x928000 (buf 0x8818000 len 1052672/101000)
DVMA ff800000 for ffffe000, mapping 0x1e92e80: dvstart 0 dvsize 0 size
1052672/101000 maxsegsz 101000 boundary 0 segcnt 1 flags 0 type 0 source 0x0
cookie 0x1eb3000 mapsize 0 nsegs 0
total length = 0/0x0
page map (0x1eb30a0) of size 64 with 64 entries
0: vmaddr 0x0 pa 0x8a8000
.............(cut).............
63: vmaddr 0x0 pa 0x926000
qe0: DMA buffer map load error 7
qe1 at qec0 slot 1 offset 0x0 rev 1iomap insert error: 12 for va 0x8898000
pa 0x928000 (buf 0x8818000 len 1052672/101000)
DVMA ff800000 for ffffe000, mapping 0x1e92c80: dvstart 0 dvsize 0 size
1052672/101000 maxsegsz 101000 boundary 0 segcnt 1 flags 0 type 0 source 0x0
cookie 0x1eb2000 mapsize 0 nsegs 0
total length = 0/0x0
page map (0x1eb20a0) of size 64 with 64 entries
0: vmaddr 0x0 pa 0x8a8000
.............(cut).............
63: vmaddr 0x0 pa 0x926000
qe1: DMA buffer map load error 7
qe2 at qec0 slot 2 offset 0x0 rev 1iomap insert error: 12 for va 0x8898000
pa 0x928000 (buf 0x8818000 len 1052672/101000)
DVMA ff800000 for ffffe000, mapping 0x1e92b00: dvstart 0 dvsize 0 size
1052672/101000 maxsegsz 101000 boundary 0 segcnt 1 flags 0 type 0 source 0x0
cookie 0x1eb7000 mapsize 0 nsegs 0
total length = 0/0x0
page map (0x1eb70a0) of size 64 with 64 entries
0: vmaddr 0x0 pa 0x8a8000
.............(cut).............
63: vmaddr 0x0 pa 0x926000
qe2: DMA buffer map load error 7
qe3 at qec0 slot 3 offset 0x0 rev 1iomap insert error: 12 for va 0x8898000
pa 0x928000 (buf 0x8818000 len 1052672/101000)
DVMA ff800000 for ffffe000, mapping 0x1e92980: dvstart 0 dvsize 0 size
1052672/101000 maxsegsz 101000 boundary 0 segcnt 1 flags 0 type 0 source 0x0
cookie 0x1eb6000 mapsize 0 nsegs 0
total length = 0/0x0
page map (0x1eb60a0) of size 64 with 64 entries
0: vmaddr 0x0 pa 0x8a8000
.............(cut).............
63: vmaddr 0x0 pa 0x926000
qe3: DMA buffer map load error 7
creator0 at mainbus0 addr 0xfec00000: Creator, model SUNW,501-2634, dac 10
wsdisplay0 at creator0: console (std, sun emulation), using wskbd0
pcons at mainbus0 not configured
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
hme0: DAD detected duplicate IPv6 address fe80:0001::0a00:20ff:fe9b:f4f1: NS
in/out=1/1, NA in=0
hme0: DAD complete for fe80:0001::0a00:20ff:fe9b:f4f1 - duplicate found
hme0: manual intervention required

Thx for help or hints in advance.

Greetings

Simon

-- 
NEU: WLAN-Router für 0,- EUR* - auch für DSL-Wechsler!
GMX DSL = supergünstig & kabellos http://www.gmx.net/de/go/dsl



Visit your host, monkey.org