Re: rip vcd / copy vcd

[Uwe Dippel <udippel_(_at_)_uniten_(_dot_)_edu_(_dot_)_my>]

On Fri, 18 Jun 2004 15:25:56 +0000, Alexander Farber wrote:

> You haven't provided your dmesg and scanbus outputs

With pleasure:

OpenBSD 3.4 (GENERIC) #4: Wed Mar 10 11:00:20 SGT 2004
    udippel_(_at_)_server_(_dot_)_uwe_(_dot_)_uniten_(_dot_)_edu_(_dot_)_my:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 451 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 133804032 (130668K)
avail mem = 118124544 (115356K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(75) BIOS, date 12/05/00, BIOS32 rev. 0 @ 0xfb230
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6a4
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdcd0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct20 10>
wd0: 8-sector PIO, LBA, 9787MB, 16383 cyl, 16 head, 63 sec, 20044080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CRD-8322B, 1.06> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <_NEC, NR-7900A, 1.23> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 9 function 0 "Matrox MGA 1064SG 220MHz" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 10 address 00:ee:b1:00:dc:ba
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: LM78J
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
isapnp0 at isa0 port 0x279: read port 0x203
"ESS ES1869 Plug and Play AudioD, ESS0006, , " at isapnp0 port 0x800/8 not configured
ess0 at isapnp0 "ESS ES1869 Plug and Play AudioD, ESS1869, , " port 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0: ESS Technology ES1869 [version 0x688b]
ess0: audio1 interrupting at irq 5
audio0 at ess0
opl0 at ess0: model OPL3
midi1 at opl0: <ESS Yamaha OPL3>
biomask c840 netmask cc40 ttymask dcc2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


I don't find a scanbus-utility.



vcdimager -l 'Some film 1/2' -vp some_film_1.mpg
sudo cdrdao write --device $CDR_DEVICE video.cue
sudo cdrecord blank=fast      
sudo cdrecord -v -eject some_image.iso

This works, more or less. (I can burn a data-CD.)

My problem is that the VCDs contain plenty of tracks; and so far I haven't
found a good method to get them into a single image (except of the
data.bin which wouldn't want to burn).
Don't forget, I want to copy a vcd; not (re)master !


Thanks,

Uwe