[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OpenBSD 3.5 pf problem

here it is

Peter Hessler wrote:
Never trim the dmesg.  Send the entire thing to misc@

OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
real mem = 536436736 (523864K)
avail mem = 491302912 (479788K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/17/03, BIOS32 rev. 0 @ 0xfd7d1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_LE Host" rev 0x13
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_LE Host" rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "ServerWorks", unknown product 0x0 rev 0x00
pci1 at pchb2 bus 1
mpt0 at pci1 dev 1 function 0 "Symbios Logic 53c1030" rev 0x07: irq 9
mpt0: firmware upload required.
mpt0: sending FW Upload request to IOC (size: 36, img size: 67560)
scsibus0 at mpt0: 16 targets
vga1 at pci0 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP LM30>
wd0: 16-sector PIO, LBA, 28629MB, 58633344 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.16> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x03
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x03
pci2 at pchb5 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5703X" rev 0x02: irq 3: address: 00:09:6b:a3:16:00
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseTX PHY, rev. 2
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: irq 4: address: 00:09:6b:a3:16:01
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseTX PHY, rev. 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbdprobe: reset response 0xe0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ca40 netmask ca58 ttymask da58
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302