[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

mount USB error message



Please forgive me if this is a known issue or error, but I was unable to find anything definitive for it. I have maned, googled and searched the archives to the best of my ability, but I am new to OpenBSD.

I'm getting the error message:
ns2 /bsd: umass_scsi_cb: status cmd failed for scsi op 0x1e

when I use:
       mount_msdos /dev/sd0i /mnt
or     mount -t msdos /dev/sd0i /mnt

I can still see /mnt and can write to it.

Thank you,
Chuck


here is my dmesg:

OpenBSD 3.4-stable (GENERIC) #0: Wed Mar 31 14:34:36 CST 2004
root_(_at_)_ns2_(_dot_)_hpisd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: disabling processor serial number
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 449 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD


real mem = 133791744 (130656K)
avail mem = 118112256 (115344K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(5a) BIOS, date 08/17/00, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8800 0xc8800/0x1000 0xe0000/0x4000! 0xe4000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Riva TNT" rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL CR6.4A>
wd0: 16-sector PIO, LBA, 6149MB, 13328 cyl, 15 head, 63 sec, 12594960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM FX4010M!B, AM2A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
yds0 at pci0 dev 12 function 0 "Yamaha 740C" rev 0x03: irq 11
ac97: codec id 0x41445303 (Analog Devices AD1819)
ac97: codec features Analog Devices Phat Stereo
audio0 at yds0
fxp0 at pci0 dev 14 function 0 "Intel 82557" rev 0x08: irq 10, address 00:90:27:91:be:f5
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
biomask c240 netmask c640 ttymask d6c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE PRO, rev 2.00/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <LEXAR, JUMPDRIVE PRO, 0> SCSI2 0/direct removable
sd0: 983MB, 983 cyl, 64 head, 32 sec, 512 bytes/sec, 2014992 sec total
umass_scsi_cb: status cmd failed for scsi op 0x1e
umass_scsi_cb: status cmd failed for scsi op 0x1e




here is my disklabel:
disklabel /dev/rsd0c

# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: JUMPDRIVE PRO  flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 983
total sectors: 2014992
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0        # microseconds
track-to-track seek: 0    # microseconds
drivedata: 0

16 partitions:
# size offset fstype [fsize bsize cpg]
c: 2014992 0 unused 0 0 # (Cyl. 0 - 983*)
i: 2013921 63 MSDOS # (Cyl. 0*- 983*)




Visit your host, monkey.org