[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Continuous 'xl1: command never completed!' log entries

After installing (ie I did not upgrade, but install from scratch)
OpenBSD 3.5 on a machine that had been running 3.3, I started getting
repeated "xl1: command never completed!" in my logs.  'man xl' said
these errors may be safely ignored.  

$ cat /etc/hostname.xl1
inet media 100baseTX mediaopt

install had originally set this to:
inet NONE

Interface setup either way produced the same error.  

Though I would get a few of these errors on boot in 3.3, in 3.5 they
never stop coming.  The card does appear to work ok though (other than
netstat reporting 4 Ierrs out of 33017 IPkts).  Is this something other
users of 'xl' cards are experiencing?  xl0 in this same macine is the
same card but different revision and does not have this problem.

Any help is greatly appreciated.


OpenBSD 3.5-stable (GENERIC) #0: Mon May 10 15:52:45 EDT 2004
cpu0: AMD Athlon(tm) MP 1600+ ("AuthenticAMD" 686-class) 1.40 GHz
real mem  = 268021760 (261740K)
avail mem = 242184192 (236508K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ee) BIOS, date 12/12/02, BIOS32 rev. 0 @
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd6c0/0x940
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("AMD 766 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 762 PCI" rev 0x11
ppb0 at pci0 dev 1 function 0 "AMD 762 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Rage 128 Pro TF" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD 766 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "AMD 766 IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E020L0>
wd0: 16-sector PIO, LBA, 19881MB, 40718160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-56MAX, 56JA> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 766 Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured
xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: irq 11
address 00:04:75:cb:a4:08
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 4
xl1 at pci0 dev 13 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
5xl1: command never completed!
xl1: command never completed!
xl1: command never completed!
 address 00:04:75:b0:5b:d7
exphy1 at xl1 phy 24: 3Com internal media interface
xl1: command never completed!
xl1: command never completed!
xl1: command never completed!
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c860 ttymask c8e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
xl1: command never completed!
many more of these