[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OpenBSD3.2: usb thumb drive panic



Hi;
	I have used the -current usb source from 
ftp.openbsd.org:/pub/OpenBSD/src/sys/dev/usb and I get this kernel panic when 
I plugged in the thumb drive:

# usb_transfer_complete: xfer=0xc0006a80 not busy 0x42555359
Mar  1 04:47:48  /bsd: usb_transfer_complete: xfer=0xc0006a80 not busy 
0x42555359
Mar  1 04:47:48  /bsd: usb_transfer_complete: xfer=0xc0006a80 not busy 
0x42555359
panic: ohci_add_done: addr 0x8138a710 not found
Stopped at      Debugger+0x4:   jr      ra
                nop
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger+0x4(5,0,0,16e26f) sp c7149ba8 ra 8017cd1c, sz 0
 panic+0xa8(8032d370,0,0,16e270) sp c7149ba8 ra 8012d9d4, sz 40
 ohci_add_done+0x80(8032d370,0,0,16e270) sp c7149bd0 ra 8012d6f0, sz 40
 ohci_intr1+0x200(8032d370,0,0,16e270) sp c7149bf8 ra 8012d4cc, sz 32
 ohci_intr+0x2c(8032d370,0,0,16e270) sp c7149c18 ra 802ca2a4, sz 24
 generic_iointr+0x7c(8032d370,0,0,16e270) sp c7149c30 ra 802c97b4, sz 56
 interrupt+0xb4(8032d370,0,0,16e270) sp c7149c68 ra 802cf030, sz 64
 k_intr+0xe8(c7149cbc,0,0,802d0414) sp c7149ca8 ra 0, sz 0
 <-> KERNEL INTERRUPT <->
idle+0x54(c7149cbc,0,0,802d0414) sp c7149d78 ra 802d0410, sz 0
 idle+0x50(c7149cbc,0,0,802d0414) sp c7149d78 ra 0, sz 0
 User-level: curproc NULL
ddb>

	Any advice would be appreciated.

Regards,
TEH

On Monday 19 April 2004 21:35, Marco Peereboom wrote:
> This should be fixed in -current.
>
> On Apr 19, 2004, at 3:50 AM, Teh Kok How wrote:
> > Hi;
> > 	I plug a 128MB Dell thumb drive into 3.2 system usb port1 and port2
> > and there
> > are messages like
> >
> > Port1:
> > # <snip>
> > ohci_timeout: xfer=0xc0006a80
> > ohci_abort_xfer: xfer=0xc0006a80 pipe=0xc0052980
> > ohci_abort_xfer: stop ed=0xc003f7a0
> > ohci_abort_xfer: set hd=8137f7a0, tl=8137f7a0
> > ohci_ctrl_done: xfer=0xc0006a80
> > ohci_device_ctrl_close: pipe=0xc0052980
> > uhub0: device problem, disabling port 1
> > ohci_root_ctrl_control type=0x23 request=01
> > ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=1 feature=1
> > ohci_root_ctrl_control type=0xa3 request=00
> > ohci_root_ctrl_transfer: get port status i=2
> > ohci_root_ctrl_transfer: port status=0x0100
> > ohci_root_ctrl_control type=0xa3 request=00
> > ohci_root_ctrl_transfer: get port status i=1
> > ohci_root_ctrl_transfer: port status=0x0101
> > ohci_root_ctrl_control type=0xa3 request=00
> > ohci_root_ctrl_transfer: get port status i=2
> > ohci_root_ctrl_transfer: port status=0x0100
> >
> > Port2:
> > # ohci_timeout: xfer=0xc0006a80
> > ohci_abort_xfer: xfer=0xc0006a80 pipe=0xc0052680
> > ohci_abort_xfer: stop ed=0xc003f7a0
> > ohci_abort_xfer: set hd=8137f7d0, tl=8137f7d0
> > ohci_ctrl_done: xfer=0xc0006a80
> > ohci_device_ctrl_close: pipe=0xc0052680
> > uhub0: device problem, disabling port 2
> > ohci_root_ctrl_control type=0x23 request=01
> > ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE port=2 feature=1
> > ohci_root_ctrl_control type=0xa3 request=00
> > ohci_root_ctrl_transfer: get port status i=1
> > ohci_root_ctrl_transfer: port status=0x0100
> > ohci_root_ctrl_control type=0xa3 request=00
> > ohci_root_ctrl_transfer: get port status i=2
> > ohci_root_ctrl_transfer: port status=0x0101
> >
> > 	The USB Host 1 Controller is embedded in M1535+ chipset. Any insight
> > and
> > suggestion is appreciated....
> >
> > Regards,
> > TEH