Re: unable to see 'Net when firewall enabled

[Steven Schneider <stvndi_(_at_)_telus_(_dot_)_net>]

Damon McMahon <inst_karma_(_at_)_hotmail_(_dot_)_com> [20031206 19:06 MST -0700]:
> 
> Steven,
> 
> Post the output of:
> 
>  ifconfig -a
> 
Ok, I've included it in this post.

> Thinking about it logically, the problem would seem to be either:
> 
> (a) your existing pf.conf does not match your new network configuration, or
> (b) your new network configuration is not working as you are expecting.
>
Okaly dokaly.  I've done something that seems to be working now, but
I'm not satisified with it and will take any pointers that you can
give.  Thanks so far. :-)

> The ifconfig output should help troubleshoot either scenario.
> 
Here it is, the output of ifconfig -a

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
lo1: flags=8008<LOOPBACK,MULTICAST> mtu 33224
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	address: 00:10:a7:26:1d:3c
	media: Ethernet 100baseTX full-duplex
	status: active
	inet6 fe80::210:a7ff:fe26:1d3c%dc0 prefixlen 64 scopeid 0x1
	inet 142.173.219.206 netmask 0xfffff000 broadcast 142.173.223.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33224
pfsync0: flags=0<> mtu 2020
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 3000
tun1: flags=10<POINTOPOINT> mtu 3000
enc0: flags=0<> mtu 1536
bridge0: flags=0<> mtu 1500
bridge1: flags=0<> mtu 1500
vlan0: flags=0<> mtu 1500
	address: 00:00:00:00:00:00
vlan1: flags=0<> mtu 1500
	address: 00:00:00:00:00:00
gre0: flags=9010<POINTOPOINT,LINK0,MULTICAST> mtu 1450
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280

-- 
W. Steven Schneider <stvndi_(_at_)_telus_(_dot_)_net>
Geek Code: 3.12
GS d? s: !a? C++>++++ UB+ L>+ E- W++(-) N+ w !O M->@ V !PS PE Y+ 
PGP+ t+ 5@ R tv@ b++ DI+ G(--) e++>+++@ h---- r+++ y++++