[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Install on IBM x345 with Symbios SCSI Controller



A fresh install on an IBM eServer x345 leads to no disks being
found.

The following is a dmesg, has anyone gotten the Symbios controller
working? If not, can I do anything to assist in getting it to
work?

Thanks.

- Eric

OpenBSD 3.3 (RAMDISK_CD) #40: Sat Mar 29 13:33:25 MST 2003
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD,3DNOW
real mem  = 1599705088 (1562212K)
avail mem = 1478848512 (1444188K)
using 4278 buffers containing 80089088 bytes (78212K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/03/03, BIOS32 rev. 0 @ 0xfd7b1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_LE Host" rev 0x13
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_LE Host" rev 0x00
pci1 at pchb1 bus 2
pchb2 at pci0 dev 0 function 2 vendor "ServerWorks", unknown product 0x0 rev 0x00
pci2 at pchb2 bus 6
em0 at pci2 dev 8 function 0 "Intel PRO/1000MT (PWLA8492MT)" rev 0x01: irq 3, address: 00:09:6b:71:ea:70
em1 at pci2 dev 8 function 1 "Intel PRO/1000MT (PWLA8492MT)" rev 0x01: irq 5, address: 00:09:6b:71:ea:71
vga1 at pci0 dev 6 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pci3 at pchb3 bus 1
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.9B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 11, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI Bridge" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x03
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x03
pci4 at pchb5 bus 4
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x03
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x03
pci5 at pchb7 bus 8
vendor "Symbios Logic", unknown product 0x30 (class mass storage, subclass SCSI, rev 0x07) at pci5 dev 7 function 0 not configured
vendor "Symbios Logic", unknown product 0x30 (class mass storage, subclass SCSI, rev 0x07) at pci5 dev 7 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c840 netmask c868 ttymask c86a
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02



Visit your host, monkey.org