[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problems booting 3.3



I'm braindead tonight... heres the dmesg

OpenBSD 3.3-current (RAMDISK) #59: Tue Apr 29 03:17:58 MDT 2003
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel Celeron ("GenuineIntel" 686-class, 0KB L2 cache) 301 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR
real mem  = 200912896 (196204K)
avail mem = 182394880 (178120K)
using 2478 buffers containing 10149888 bytes (9912K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(69) BIOS, date 07/03/98, BIOS32 rev. 0 @
0xfb2f0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb768
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdb20/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV1364D>
wd0: 16-sector PIO, LBA, 13067MB, 16383 cyl, 16 head, 63 sec, 26762400
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CREATIVE, CD5233E, 2.02> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not
configured
ne3 at pci0 dev 10 function 0 "NetVin NetVin 5000" rev 0x00: irq 10
ne3: address 00:40:95:45:34:17
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
ep0: irq 10 already in use
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
ep1 at isapnp0 "3Com 3C509B EtherLink III, TCM5090, PNP80F7, " port
0x210/16 irq 5: address 00:a0:24:34:1e:45, utp/aui (default utp)
biomask c040 netmask c460 ttymask c462
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02