[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ipcheck (core dumped)


root_(_at_)_kobaz_(_dot_)_ath_(_dot_)_cx/root # ipcheck.py
Memory fault (core dumped)

root_(_at_)_kobaz_(_dot_)_ath_(_dot_)_cx/root # pkg_info | grep ipcheck
ipcheck-0.157      fully compliant DynDNS.org client

root_(_at_)_kobaz_(_dot_)_ath_(_dot_)_cx/root # pkg_info | grep python
python-2.1.3p1     interpreted object-oriented programming language

with python-2.2.1p1 also core dumped

any ideas ? 

OpenBSD 3.3 (GENERIC) #0: Thu Apr 24 11:47:50 CEST 2003
cpu0: F00F bug workaround installed
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 200 MHz
real mem  = 150581248 (147052K)
avail mem = 133705728 (130572K)
using 1863 buffers containing 7630848 bytes (7452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(70) BIOS, date 01/09/99, BIOS32 rev. 0 @ 0xfb250
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6c8
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdac0/128 (6 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 0
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC24300B>
wd0: 16-sector PIO, LBA, 4112MB, 8912 cyl, 15 head, 63 sec, 8421840 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01pci_intr_map: no mapping for pin D
: couldn't map interrupt
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 9 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:e0:7d:a5:0a:d7
rlphy0 at rl0 phy 0: RTL internal phy
vr0 at pci0 dev 11 function 0 "VIA RhineII-2" rev 0x43: irq 10 address 00:05:5d:fc:c7:0b
ukphy0 at vr0 phy 8: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0005be, model 0x0008, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 4000 netmask 4c00 ttymask 4c82
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Visit your host, monkey.org