[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Status of RAIDFrame in 3.3?



Hi all

We're trying to set up an OpenBSD 3.3 box (userland from snapshot.
Latest CVS Kernel GENERIC + raid + raidautoconf + Ultra133 TX2 patch
posted by Alexander Yurchenko). The machine is Unisys Aqua 300Mhz with
four Maxtor 160GB disks on only primary channels on two Ultra133 TX2
controlers. The machine freezes when we try to do the

raidclt -iv raid?

step. We manage to get raid0 and raid1 up if we reboot between the inits
and run in single user mode. Howeber the raid2 freezes the machine.Any
ideas?

TIA

Johan Hedin


dmesg:

OpenBSD 3.3 (BRICANYL) #1: Sat Mar 29 14:17:05 CET 2003
    root_(_at_)_bricanyl_(_dot_)_sth_(_dot_)_ecare_(_dot_)_se:/usr/src/sys/arch/i386/compile/BRICANYL
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 cache) 301 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
real mem  = 301506560 (294440K)
avail mem = 272805888 (266412K)
using 3706 buffers containing 15179776 bytes (14824K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 05/26/98, BIOS32 rev. 0 @ 0xfd7b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
WARNING: can't reserve area for I/O APIC.
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x05: irq 9, address 00:00:e2:18:1e:16
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
eap0 at pci0 dev 18 function 0 "Ensoniq CT5880" rev 0x02: irq 11
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
pciide1 at pci0 dev 19 function 0 "Promise PDC20269" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 4G160J8>
wd0: 16-sector PIO, LBA48, 156334MB, 16383 cyl, 16 head, 63 sec, 320173056 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <Maxtor 6Y160L0>
wd1: 16-sector PIO, LBA48, 156334MB, 16383 cyl, 16 head, 63 sec, 320173056 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 20 function 0 "Promise PDC20269" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide2: using irq 5 for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <Maxtor 4G160J8>
wd2: 16-sector PIO, LBA48, 156334MB, 16383 cyl, 16 head, 63 sec, 320173056 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
wd3 at pciide2 channel 1 drive 0: <Maxtor 6Y160L0>
wd3: 16-sector PIO, LBA48, 156334MB, 16383 cyl, 16 head, 63 sec, 320173056 sectors
wd3(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 660 netmask 660 ttymask 6e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
raid1 (root): (RAID Level 1) total number of sectors is 4194176 (2047 MB)
raid0 (root): (RAID Level 1) total number of sectors is 8593024 (4195 MB)
raid2 (root): (RAID Level 5) total number of sectors is 934698336 (456395 MB)
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
dkcsum: wd3 matched BIOS disk 83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted

disklabel: wd0-wd1
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: Maxtor 4G160J8  
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 320173056
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:  4194225       63    4.2BSD     1024  8192    16 	# (Cyl.    0*- 4160)
  b:   204624  4194288      swap                      	# (Cyl. 4161 - 4363)
  c: 320173056        0    unused        0     0       	# (Cyl.    0 - 317631)
  d:  4194288  4398912      RAID                      	# (Cyl. 4364 - 8524)
  e: 311566185  8593200      RAID                      	# (Cyl. 8525 - 317618*)

disklabel wd2-wd3:
# /dev/rwd2c:
type: ESDI
disk: ESDI/IDE disk
label: Maxtor 4G160J8  
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 320173056
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:  8593137       63      RAID                      	# (Cyl.    0*- 8524)
  c: 320173056        0    unused        0     0       	# (Cyl.    0 - 317631)
  e: 311566185  8593200      RAID                      	# (Cyl. 8525 - 317618*)

raid0.conf:
START array
 # numRow numCol numSpare
 1 2 0

 START disks
 /dev/wd2a
 /dev/wd3a

 START layout
 # sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level_1
 128 1 1 1

 START queue
 fifo 100

raid1.conf:
START array
 # numRow numCol numSpare
 1 2 0

 START disks
 /dev/wd0d
 /dev/wd1d

 START layout
 # sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level_1
 128 1 1 1

 START queue
 fifo 100

raid2.conf:
START array
 # numRow numCol numSpare
 1 4 0

 START disks
 /dev/wd1e
 /dev/wd2e
 /dev/wd3e
 /dev/wd0e

 START layout
 # sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level_5
 32 1 1 5

 START queue
 fifo 100