sparc64 snapshot packages

[Cameron Schaus <cam_(_at_)_schaus_(_dot_)_ca>]

I have installed the 20030312 sparc64 snapshots onto my ultra 5 (dmesg
below).

I installed the ntp-4.1.74.tgz package from the snapshot packages
directory, but I noticed that ntpd will not start up.  It exits with a
signal 10 (bus error?)

--------------------
bash-2.05b# /usr/local/sbin/ntpd
bash-2.05b# Mar 16 21:46:38 shady ntpd[1692]: ntpd 4_(_dot_)_1_(_dot_)_74_(_at_)_1_(_dot_)_998-r Thu Mar  6 08:24:57 MST 2003 (1)
Mar 16 21:46:38 shady ntpd[1692]: ntpd exiting on signal 10
--------------------

I also installed the php4-core-4.2.3p1.tgz package from the snapshot
packages directory, and this package also exits on signal 10 when I
run squirrelmail.  Simpler php scripts seemed to work.

--------------------
[Sun Mar 16 21:13:15 2003] [notice] child pid 28043 exit signal Bus error (10)
[Sun Mar 16 21:13:26 2003] [notice] child pid 17451 exit signal Bus error (10)
--------------------

Are these propolice symptoms or compiler problem -- I read that they
had to build some of the packages with gcc 3.02?  Has anyone else seen
problems with these packages on sparc64?

Is there anything I can do to get a functional php and ntp?

Thanks,
Cam



--------------------
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.3 (GENERIC) #42: Tue Mar 11 22:02:30 MST 2003
    deraadt_(_at_)_sparc64_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 268435456
avail memory = 240295936
using 1638 buffers containing 13418496 bytes of memory
bootpath: /pci_(_at_)_1f,0/pci_(_at_)_1,1/ide_(_at_)_3,0/disk_(_at_)_0,0
mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 270 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTDB: f68000 to fe8000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x11
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 33
wskbd0 at comkbd0: console keyboard
com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59: hostid 809f0786
flashprom at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: nvaddrs 0
audio0 at audioce0
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address 08:00:20:9f:07:86
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
hme0: using ivec 3021 for interrupt
vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GT" rev 0x9a
wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 1820 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 92041U4>
wd0: 16-sector PIO, LBA, 19541MB, 16383 cyl, 16 head, 63 sec, 40020624 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM !B, B06> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 3
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x11
pci2 at ppb1 bus 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 270MHz as system clock.
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02