[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: networks problems


this card is a Zonet, that works in linux (the howto
to work in linux (official) says:

10/100 FastEthernet PC Card Driver for lna-100n3 and 
lnadl-100n model 
after RedHat 7.0 or Kernel 2.4.0 Installation How-to:

 1. Will /etc/pcmcia/config file modify following lines 
   Existing lines in document->                
       device "pcnet_cs"
       class "network" module "net/8390, "pcnet_cs"
   Add three lines->     
       card "PCMCIA FastEthernet"
       version "PCMCIA", "FastEthernet"
       bind "pcnet_cs"
  2. Restart the cardmgr-
        "/etc/rc.d/init.d/pcmcia restart"

And my dmesg shows:

OpenBSD 3.2 (GENERIC) #25: Thu Oct  3 19:51:53 MDT 2002
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 75 
real mem  = 41725952 (40748K)
avail mem = 33132544 (32356K)
using 534 buffers containing 2187264 bytes (2136K) of 
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 03/27/96
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 92%
apm0: AC off, battery charge high, estimated 2:04 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe0000/0x10000
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), 
using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <WDC AL2540H>
wd0: 16-sector PIO, LBA, 515MB, 1048 cyl, 16 head, 63 
sec, 1056384 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A 
and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
"PCMCIA, FastEthernet, V, 1.0" at pcmcia1 function 0 not 
pcic0: irq 3, polling enabled
biomask 4040 netmask 4040 ttymask 50ca
pctr: 586-class performance counters and user-level 
cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
WARNING: clock time much less than file system time
WARNING: using file system time

thanks for any help... i really need it

> You may get better results if you send full details 
(make, model)
> of your card and the _complete_ dmesg output to the 
> Good luck
> Tom
> >>> Marco Derix 11-Dec-02 13:03 >>>
> Do we have to guess what model pcmcia card you use.  
If you find out
> which one, search the faq if the thing is supported.  
If not buy
> another network card.
> Marco Derix
> On Wed, Dec 11, 2002 at 10:44:27AM -0200, mboldin 
> > I am with some problems to configure my pcmcia card
> > ate openbsd 3.2
> > dmesg shows:
> > 
> > pcmcia0 at pcic0 controller 0 socket 0
> > pcmcia1 at pcic0 controller 0 socket 1
> > "PCMCIA, FastEthernet, V, 1.0" at pcmcia1 function 0
> > not configured.
> > pcic0: irq 3, polling enable
> > 
> > but i cant configure it... i searched in google...
> > but it doesent help..
> > 
> > what can i do ? i have a toshiba 100cs...

Venha para a VilaBOL!
O melhor lugar para você construir seu site. Fácil e grátis!

Visit your host, monkey.org