[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: sendmail and pflogd to fix



Just a thought - did you remove IPv6 from the kernel?
If you did you'll need to comment some lines out of the .cf files...

Dom
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dom De Vitto                                       Tel. 07855 805 271
http://www.devitto.com                         mailto:dom_(_at_)_devitto_(_dot_)_com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

 


-----Original Message-----
From: owner-misc_(_at_)_openbsd_(_dot_)_org [mailto:owner-misc_(_at_)_openbsd_(_dot_)_org] On Behalf
Of matti christensen
Sent: Sunday, December 08, 2002 7:24 PM
To: misc_(_at_)_openbsd_(_dot_)_org
Subject: sendmail and pflogd to fix


- i'm green with openbsd but been using some other *nix like systems for
some years. i've been interested of openbsd for a long time but now
found myself installing it for my two machines - other of which working
as a fileserver and firewall on my small home lan -- some problems
though

- after building my minimalistic kernel ( dmesg follows ) and doing some
tinkering with rc.conf, pf.conf etc. to start only sshd ( no inetd, no
nothing else ) sendmail doesn't work and same problem with pflogd (
which has nothing to log as of yet according to pf.conf )

- to get this firewall running i would be happy to get some help --
after that i must of course start studying the system by reading
documentation and Your 'misc' email list

----start of dmesg----

OpenBSD 3.2 (MC) #6: Tue Dec  3 23:20:01 EET 2002
    mchriste_(_at_)_mc3_(_dot_)_koti:/usr/src/sys/arch/i386/compile/MC
cpu0: xchg bug workaround performed
cpu0: Cyrix 6x86 (486-class)
real mem  = 66699264 (65136K)
avail mem = 59916288 (58512K)
using 839 buffers containing 3436544 bytes (3356K) of memory mainbus0
(root) bios0 at mainbus0: AT/286+(45) BIOS, date 02/29/96, BIOS32 rev. 0
@ 0xfcea0 apm0 at bios0: Power Management spec V1.1
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x680
pcibios0: PCI BIOS has 5 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "SIS", unknown product 0x5517 rev
0x00 pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01 pciide0 at
pci0 dev 1 function 1 "SIS 5513 EIDE" rev 0x08: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility wd0
at pciide0 channel 0 drive 0: <QUANTUM FIREBALL_TM1280A>
wd0: 16-sector PIO, LBA, 1222MB, 2484 cyl, 16 head, 63 sec, 2503872
sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
vga0 at pci0 dev 10 function 0 "S3 Trio32/64" rev 0x00 wsdisplay0 at
vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
ep0 at isa0 port 0x300/16 irq 10: address 00:60:8c:36:a1:86, aui/bnc
(default bnc) ep1 at isa0 port 0x310/16 irq 12: address
00:60:97:57:9a:2a, utp/aui/bnc (default utp) pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at
isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2
head, 18 sec biomask 4040 netmask 5440 ttymask 5442
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

----end of dmesg----

----start of tail /var/log/maillog----

Dec  8 21:00:08 mc3 sm-msp-queue[31936]: gB8J03hJ031936: to=root,
delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=31374,
relay=localhost.koti., dsn=4.0.0, stat=Deferred: Connection refused by
localhost.koti. Dec  8 21:00:08 mc3 sm-msp-queue[31936]: gB1402qw008233:
to=root, delay=7+15:00:02, xdelay=00:00:00, mailer=relay, pri=15975044,
relay=localhost.koti., dsn=4.0.0, stat=Deferred: Connection refused by
localhost.koti. Dec  8 21:00:08 mc3 sm-msp-queue[31936]: gB1402qw008233:
gB8J03hK031936: return to sender: Cannot send message for 5 days Dec  8
21:00:08 mc3 sm-msp-queue[31936]: gB8J03hK031936: to=postmaster,
delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=136634,
relay=localhost.koti., dsn=4.0.0, stat=Deferred: Connection refused by
localhost.koti. Dec  8 21:00:08 mc3 sm-msp-queue[31936]: gAUNV0nm015035:
to=root, ctladdr=root (0/0), delay=7+19:29:08, xdelay=00:00:00,
mailer=relay, pri=16680041, relay=localhost.koti., dsn=4.0.0,
stat=Deferred: Connection refused by localhost.koti. Dec  8 21:00:08 mc3
sm-msp-queue[31936]: gAUNV0nm015035: gB8J03hL031936: sender notify:
Cannot send message for 5 days Dec  8 21:00:09 mc3 sm-msp-queue[31936]:
gB8J03hL031936: to=root, delay=00:00:01, xdelay=00:00:00, mailer=relay,
pri=32274, relay=localhost.koti., dsn=4.0.0, stat=Deferred: Connection
refused by localhost.koti. Dec  8 21:00:09 mc3 sm-msp-queue[31936]:
gAUNUwcd021719: to=root, ctladdr=root (0/0), delay=7+19:29:11,
xdelay=00:00:00, mailer=relay, pri=16680047, relay=localhost.koti.,
dsn=4.0.0, stat=Deferred: Connection refused by localhost.koti. Dec  8
21:00:09 mc3 sm-msp-queue[31936]: gAUNUwcd021719: gB8J03hM031936: sender
notify: Cannot send message for 5 days Dec  8 21:00:09 mc3
sm-msp-queue[31936]: gB8J03hM031936: to=root, delay=00:00:00,
xdelay=00:00:00, mailer=relay, pri=135044, relay=localhost.koti.,
dsn=4.0.0, stat=Deferred: Connection refused by localhost.koti.

----end of tail /var/log/maillog----

----start of tail /var/log/daemon----

Dec  4 08:51:02 mc3 pflogd[3697]: Failed to initialize: /dev/bpf0:
Device not configured Dec  4 08:51:02 mc3 pflogd[3697]: Exiting, init
failure

----end of tail /var/log/daemon----

many thanks in advance !

/mc

Use the Source !  (Yoda)



Visit your host, monkey.org