Re: dc0: MII without any PHY!

[Dan Heaver <Dan_(_dot_)_Heaver_(_at_)_fdmgroup_(_dot_)_com>]

Have you tried creating a /etc/hostname.dc0 file ?

-----Original Message-----
From: Ajit Warrier [mailto:unixajit_(_at_)_yahoo_(_dot_)_com] 
Sent: 20 November 2002 17:08
To: misc_(_at_)_openbsd_(_dot_)_org
Subject: dc0: MII without any PHY!

Hi all,

I have installed OpenBSD 3.2 on my Thinkpad 600. This
laptop has a Xircom CardBus RBE-100 network card which
is in the slot when I am booting up. However the
adapter is not recognised by the system. There is a
reference to dc0, however there is no
/etc/hostname.dc0 file.

Can someone please help me out here?

Here is the full output of dmesg - 

---------------------Start
dmesg-----------------------

OpenBSD 3.2 (GENERIC) #25: Thu Oct  3 19:51:53 MDT
2002
   
deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class,
512KB L2 cache) 232 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 66498560 (64940K)
avail mem = 56123392 (54808K)
using 837 buffers containing 3428352 bytes (3348K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cf) BIOS, date 04/02/98,
BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 0%
apm0: AC on, battery charge critical, estimated 0:00
hours
pcibios0 at bios0: rev. 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfb2b0/96
(4 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev
0x02
cbb0 at pci0 dev 2 function 0 "Texas Instruments
PCI1250 PCI-CardBus" rev 0x02: irq 11
cbb1 at pci0 dev 2 function 1 "Texas Instruments
PCI1250 PCI-CardBus" rev 0x02: irq 11
vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph
NM2160" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4
ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE"
rev 0x01: DMA, channel 0 wired to compatibility,
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DYKA-23240>
wd0: 16-sector PIO, LBA, 3102MB, 6304 cyl, 16 head, 63
sec, 6354432 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM
XM-1702BC, 1562> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev
0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7
function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8,
lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8,
lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c840 netmask c840 ttymask d842
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dc0 at cardbus1 dev 0 function 0 irq 11 address
00:10:a4:aa:2d:b6
dc0: MII without any PHY!

----------------------End
dmesg------------------------

Thanks,

Ajit
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com


________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________

________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________