[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Crashes



On Mon, 2002-11-04 at 12:27:03 -0600, Marco Peereboom wrote...

' How about a dmesg to start with?
' And what about services you are running?
' 
' The amount of information you are providing is insufficient for anyone to
' help you.

I'll answer these in reverse...

Running on the box...

openssh, pf, isakmpd, tinydns (though compiled by hand and not by
source).

The dmesg.......

OpenBSD 3.2 (GENERIC) #25: Thu Oct  3 19:51:53 MDT 2002
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 200 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
real mem  = 133804032 (130668K)
avail mem = 118452224 (115676K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(37) BIOS, date 09/25/97, BIOS32 rev. 0 @ 0xfb560
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xba34
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf2c00/112 (5 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01
pcib0 at pci0 dev 1 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
uhci0 at pci0 dev 1 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 1 function 3 not configured
tx0 at pci0 dev 9 function 0 "SMC 83C170 (EPIC/100)" rev 0x06: irq 11 address 00:e0:29:22:ea:00
qsphy0 at tx0 phy 3: QS6612 10/100 media interface, rev. 1
tx1 at pci0 dev 10 function 0 "SMC 83C170 (EPIC/100)" rev 0x06: irq 9 address 22:d4:2b:cf:22:d4
qsphy1 at tx1 phy 3: QS6612 10/100 media interface, rev. 1
bha3 at pci0 dev 11 function 0 "BusLogic MultiMaster" rev 0x08: irq 10, BusLogic 9xxC SCSI
bha3: model BT-958, firmware 5.07B
bha3: sync, parity
bha3 targ 2: sync, offset 15, period 100nsec
bha3 targ 4: sync, offset 15, period 100nsec
scsibus0 at bha3: 8 targets
sd0 at scsibus0 targ 2 lun 0: <IBM-PCCO, DDRS-39130W !#, S97B> SCSI2 0/direct fixed
sd0: 8678MB, 8387 cyl, 10 head, 211 sec, 512 bytes/sec, 17774160 sec total
sd1 at scsibus0 targ 4 lun 0: <SEAGATE, ST34501W, 0018> SCSI2 0/direct fixed
sd1: 4339MB, 6576 cyl, 8 head, 168 sec, 512 bytes/sec, 8887200 sec total
vga1 at pci0 dev 12 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c40 netmask e40 ttymask e42
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02