[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ISAKMPD (from moal)



Hello Hans-Joerg and Hakan!
Thank You very much for Your Feedback!

I tested "pfctl -s rules", but my mashine has no rules and the whole pf is
also disabled!
After starting isakmpd, it tryes to create a connection several times and
then gives "no SA matched query..." out , as before!
What do You think, could it depend on CRL or certificates?

I'll be glad to hear smth from You

Alex

p.s.:

ifconfig -a

**************************************************************************
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
      inet6 ::1 prefixlen 128
      inet 127.0.0.1 netmask 0xff000000
lo1: flags=8008<LOOPBACK,MULTICAST> mtu 33224
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      media: Ethernet autoselect (10baseT)
      status: active
      inet 10.128.0.21 netmask 0xffffff00 broadcast 10.128.0.255
      inet6 fe80::210:5aff:fe3b:f937%xl0 prefixlen 64 scopeid 0x1
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
      media: Ethernet autoselect (none)
      status: no carrier
      inet 10.128.3.22 netmask 0xffffff00 broadcast 10.128.3.255
      inet6 fe80::210:4bff:fe6c:8617%xl1 prefixlen 64 scopeid 0x2
pflog0: flags=0<> mtu 33224
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=10<POINTOPOINT> mtu 3000
tun1: flags=10<POINTOPOINT> mtu 3000
enc0: flags=0<> mtu 1536
bridge0: flags=0<> mtu 1500
bridge1: flags=0<> mtu 1500
vlan0: flags=0<> mtu 1500
vlan1: flags=0<> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280