[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

death by ahc1 ?



Hello,
One of my OpenBSD boxes decided to lock-up and puke the following to the
screen, repeatedly:

ahc1: Received a Master Abort
ahc1: Received a Target Abort
ahc1: Signaled a Target Abort
ahc1: Data Parity Error has been reported via PERR#
ahc1: PCI error Interrupt at seqaddr = 0x9

It scrolls this to the screen rapidly, over and over.  Also, the 0x9
might be an 0x8 as well, perhaps alternating, it's just scrolling too
fast to tell.  I see someone posted on a similar lockup back in July
based on those snapshots, but I don't see that anyone responded to it.

I'll paste a dmesg to the bottom of this.  It's a snapshot from 9/29,
doing ipforwarding and running pf.

It didn't drop to ddb> or anything, it just contents itself by scrolling
and scrolling.  A cluestick beating would be much appreciated.  Is my
disk abut to die?  

thanks,
Matt


dmesg:

Oct  2 12:07:02 spiny /bsd: OpenBSD 3.2-beta (GENERIC) #15: Sun Sep 29
17:53:31 MDT 2002
Oct  2 12:07:02 spiny /bsd:    
deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
Oct  2 12:07:02 spiny /bsd: cpu0: Intel Pentium II ("GenuineIntel"
686-class, 512KB L2 cache) 351 MHz
Oct  2 12:07:03 spiny /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36
,MMX,FXSR
Oct  2 12:07:03 spiny /bsd: real mem  = 268013568 (261732K)
Oct  2 12:07:03 spiny /bsd: avail mem = 242745344 (237056K)
Oct  2 12:07:03 spiny /bsd: using 3297 buffers containing 13504512 bytes
(13188K) of memory
Oct  2 12:07:03 spiny /bsd: mainbus0 (root)
Oct  2 12:07:03 spiny /bsd: bios0 at mainbus0: AT/286+(18) BIOS, date
09/15/98, BIOS32 rev. 0 @ 0xf0570
Oct  2 12:07:03 spiny /bsd: apm0 at bios0: Power Management spec V1.2
Oct  2 12:07:03 spiny /bsd: apm0: AC on, battery charge unknown
Oct  2 12:07:03 spiny /bsd: pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf2
Oct  2 12:07:03 spiny /bsd: pcibios0: PCI IRQ Routing Table rev. 1.0 @
0xf0d60/144 (7 entries)
Oct  2 12:07:03 spiny /bsd: pcibios0: PCI Interrupt Router at 000:04:0
("Intel 82371FB PCI-ISA" rev 0x00)
Oct  2 12:07:03 spiny /bsd: pcibios0: PCI bus #1 is the last bus
Oct  2 12:07:03 spiny /bsd: bios0: ROM list: 0xc0000/0x8000
0xc8000/0x5000
Oct  2 12:07:03 spiny /bsd: pci0 at mainbus0 bus 0: configuration mode 1
(no bios)
Oct  2 12:07:03 spiny /bsd: pchb0 at pci0 dev 0 function 0 "Intel
82443BX PCI-AGP" rev 0x02
Oct  2 12:07:03 spiny /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82443BX
AGP" rev 0x02
Oct  2 12:07:03 spiny /bsd: pci1 at ppb0 bus 1
Oct  2 12:07:03 spiny /bsd: vga1 at pci1 dev 0 function 0 "Matrox MGA
G200 AGP" rev 0x01
Oct  2 12:07:03 spiny /bsd: wsdisplay0 at vga1: console (80x25, vt100
emulation)
Oct  2 12:07:04 spiny /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
Oct  2 12:07:04 spiny /bsd: pcib0 at pci0 dev 4 function 0 "Intel
82371AB PIIX4 ISA" rev 0x02
Oct  2 12:07:04 spiny /bsd: pciide0 at pci0 dev 4 function 1 "Intel
82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1
wired to compatibility
Oct  2 12:07:04 spiny /bsd: atapiscsi0 at pciide0 channel 0 drive 0
Oct  2 12:07:04 spiny /bsd: scsibus0 at atapiscsi0: 2 targets
Oct  2 12:07:04 spiny /bsd: cd0 at scsibus0 targ 0 lun 0: <TOSHIBA,
CD-ROM XM-6402B, 1008> SCSI0 5/cdrom removable
Oct  2 12:07:05 spiny /bsd: cd0(pciide0:0:0): using PIO mode 4,
Ultra-DMA mode 2
Oct  2 12:07:05 spiny /bsd: uhci0 at pci0 dev 4 function 2 "Intel
82371AB USB" rev 0x01: irq 5
Oct  2 12:07:05 spiny /bsd: usb0 at uhci0: USB revision 1.0
Oct  2 12:07:05 spiny /bsd: uhub0 at usb0
Oct  2 12:07:05 spiny /bsd: uhub0: vendor 0x0000 UHCI root hub, class
9/0, rev 1.00/1.00, addr 1
Oct  2 12:07:05 spiny /bsd: uhub0: 2 ports with 2 removable, self
powered
Oct  2 12:07:05 spiny /bsd: "Intel 82371AB Power Mgmt" rev 0x02 at pci0
dev 4 function 3 not configured
Oct  2 12:07:05 spiny /bsd: ahc1 at pci0 dev 6 function 0 "Adaptec
AIC-7890/1 U2" rev 0x00: irq 5
Oct  2 12:07:05 spiny /bsd: ahc1: aic7890/91: Ultra2 Wide Channel A,
SCSI Id=7, 32/255 SCBs
Oct  2 12:07:05 spiny /bsd: scsibus1 at ahc1: 16 targets
Oct  2 12:07:05 spiny /bsd: ahc1: target 0 synchronous at 20.0MHz,
offset = 0xf
Oct  2 12:07:05 spiny /bsd: ahc1: target 0 using tagged queuing
Oct  2 12:07:05 spiny /bsd: sd0 at scsibus1 targ 0 lun 0: <IBM,
DDRS-34560D, DC1B> SCSI2 0/direct fixed
Oct  2 12:07:05 spiny /bsd: sd0: 4357MB, 8387 cyl, 5 head, 212 sec, 512
bytes/sec, 8925000 sec total
Oct  2 12:07:05 spiny /bsd: xl0 at pci0 dev 9 function 0 "3Com 3c900
10Mbps-Combo" rev 0x00: irq 5 address 00:60:08:c8:bc:8a
Oct  2 12:07:05 spiny /bsd: xl0: selecting 10baseT transceiver, half
duplex
Oct  2 12:07:06 spiny /bsd: pckbc0: using irq 1 for kbd slot
Oct  2 12:07:06 spiny /bsd: wskbd0 at pckbd0: console keyboard, using
wsdisplay0
Oct  2 12:07:06 spiny /bsd: pcppi0 at isa0 port 0x61
Oct  2 12:07:06 spiny /bsd: midi0 at pcppi0: <PC speaker>
Oct  2 12:07:06 spiny /bsd: sysbeep0 at pcppi0
Oct  2 12:07:06 spiny /bsd: lpt0 at isa0 port 0x378/4 irq 7
Oct  2 12:07:06 spiny /bsd: npx0 at isa0 port 0xf0/16: using exception
16
Oct  2 12:07:06 spiny /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a,
16 byte fifo
Oct  2 12:07:06 spiny /bsd: pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a,
16 byte fifo
Oct  2 12:07:06 spiny /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Oct  2 12:07:06 spiny /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head,
18 sec
Oct  2 12:07:06 spiny /bsd: biomask 4060 netmask 5460 ttymask 54e2
Oct  2 12:07:06 spiny /bsd: pctr: 686-class user-level performance
counters enabled
Oct  2 12:07:06 spiny /bsd: mtrr: Pentium Pro MTRR support
Oct  2 12:07:06 spiny /bsd: dkcsum: sd0 matched BIOS disk 80
Oct  2 12:07:06 spiny /bsd: root on sd0a
Oct  2 12:07:06 spiny /bsd: rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Oct  2 12:07:06 spiny /bsd: WARNING: / was not properly unmounted
Oct  2 12:07:02 spiny pflogd[29756]: Listening on pflog0, logging to
/var/log/pflog, snaplen 96 
Oct  2 12:07:06 spiny savecore: no core dump
Oct  2 12:07:05 spiny /bsd: rl0 at pci0 dev 10 function 0 "Accton
Technology MPX 5030/5038" rev 0x10: irq 12 address 00:e0:29:47:b3:dd
Oct  2 12:07:05 spiny /bsd: rlphy0 at rl0 phy 0: RTL internal phy
Oct  2 12:07:05 spiny /bsd: wi0 at pci0 dev 11 function 0 "Intersil
PRISM2.5 Mini-PCI WLAN" rev 0x01: irq 10
Oct  2 12:07:05 spiny /bsd: wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.1.0
(primary), 1.4.2 (station), address 00:02:dd:32:89:7c
Oct  2 12:07:05 spiny /bsd: isa0 at pcib0
Oct  2 12:07:05 spiny /bsd: isadma0 at isa0
Oct  2 12:07:05 spiny /bsd: pckbc0 at isa0 port 0x60/5
Oct  2 12:07:06 spiny /bsd: pckbd0 at pckbc0 (kbd slot)



Visit your host, monkey.org